ML600 - 280kg Mini Maglock - 12/24V DC
Code: ML600
The ML600 is an RGL mini electromagnetic lock with a 280Kg holding force and built-in surge protection. It is only fire rated when used with the armature housing - ML600AS.
Read More
Electric door locks are an essential part of an access control system and we supply a range of valuable solutions for securing the doors in your building. When combined with proximity readers or keypads these systems result in improved control of access to your building. Door Controls Direct offers systems to suit every budget and work with you to meet your particular security requirements; including the most extensive range of locks, bolts and strikes. We partner with the leading suppliers and manufacturers, such as Adams Rite, Alpro and Assa Abloy to provide electronic security devices available in 12V or 24V in both AC and DC.
Maglocks are a very common and popular electric locking product. They are very easy to install and often surface mounted. There are a range of maglocks available with a variety of holding forces and are great for low security applications. Some, like the Adams Rite MS Maglock (ELMSMAG) offer greater security than others and these have hardened steel mandibles that clamp onto the armature plate should forced entry be attempted. All maglocks operate as “Fail Safe” units.
Electric Strikes are an alternative to a maglock. You might choose an electric strike over a maglock for aesthetic reasons, but you might also choose one if you would rather that the door was “Fail Locked/Fail Secure” when power is cut. A lot of electric strikes offer both options and it’s a simple case of moving a screw in the body of the strike to change the operation. We supply a variety of 12V DC and 24V AC/DC strikes that can be morticed or rim mounted (product dependent). Some are heavier duty than others, so it’s really important that you consider the amount of traffic that will be passing through the door.
Solenoid Bolts are a great product to use on aluminium doors where a high level of security is required. A sensor on the unit detects when the door and lock are in alignment and throws the bolt which secures the door. When power is removed, the bolt retracts and allows for safe exit through the door. The bolts can be installed either vertically or horizontally in the door frame which is generally easier to get power to than if it were installed in the door itself.
Solenoid Locks offer an even greater level of security than a solenoid bolt as the solenoid engages with the handle to control access. When enabled, the solenoid engages within the handle, allowing the handle to operate the latch and open the door.
Motor Locks function in the opposite way to a solenoid lock. The deadbolt is already engaged in the door frame but when a fob is presented to the reader or a code is entered on the door keypad; the motor in the lock retracts the deadbolt, generally providing a higher level of security.
Electromagnetic shear locks are similar to maglocks but are generally higher security as they have a physical locking element to them as well. There are integral contact sensors within the lock and armature plate and when these are about 3mm from each other, they pull together and create a “shear” locking force. They are ideal for use on double swing doors.
A pin in the centre of the lock prevents any slide movement and there is also an “Anti-Residual Button” located on the armature plate.
Active filters
Code: ML600
The ML600 is an RGL mini electromagnetic lock with a 280Kg holding force and built-in surge protection. It is only fire rated when used with the armature housing - ML600AS.
Code: ML600ZL
Z & L brackets for inward opening doors to suit a range of maglocks. Please select the bracket to suit your maglock using the drop down menu.
Code: ML600AS
ML Series Maglock Armature Housing for the RGL ML600 & ML1200 Maglocks.
Code: ML600L
L brackets for outward opening doors to suit a range of maglocks. Please use the drop down menu to select the bracket to suit your maglock.
Code: ESEL900
The Alpro EL900 ANSI Mortice Electric Strike is a 12V DC, compact electric strike complete with both long and short faceplates, for use in metal or timber door applications.
Code: ML1200
The ML1200 maglock is 12V/24V DC with a 545Kg holding force and built in surge protection. It is fire rated only when used with the armature housing.
Code: ML1200EX
The EXML1200 545kg external gate maglock with a 545kg holding force, is suitable for use on external gates. Select from unmonitored or monitored versions.
Code: ML600EX
The EXML600 280kg mini external gate maglock has a 280kg holding force, suitable for use on external gates. Select from monitored or unmonitored versions.
Code: ML300
The ML300 mini maglock is an RGL electromagnetic door lock, 12V DC, with a 180Kg holding force and built-in surge protection.
Code: ML600D
The ML600D double maglock is 12V/24V DC with built in surge protection and a 300kg holding force. The armature housing is available separately for use on fire doors.
Code: ML600ABZL
Architectural "Z & L" bracket is an aesthetically pleasing bracket solution for RGL maglocks. Select the finish and model of maglock to suit.
Please note that they are not suitable for use on external maglocks.
Code: ES110
The Trimec ES110 electric release is fail safe/fail secure reversible and is 12V DC/24V DC dual voltage. It comes with a stainless steel striker for additonal strength and durability and is supplied with long and short faceplates.IP56 rated for use in exposed areas.
Code: EL2600
MSL2600 1200kg Shear Lock for timber, steel and aluminium doors with a 12/24V DC operating voltage.
Code: ES8000
The Trimec ES8100 12/24v DC V-Lock electric lock is a high torque mortised bolt that moves into a V shaped strike plate which pulls the door into alignment with the lock. Fire rated versions are supplied with an intumescent kit to suit either FD30 or FD60 rated fire doors.
The ES8100 has superseded the Trimec ES8000 model.
Code: ML1200DM
The ML1200DM double maglock with a 545Kg holding force and built in surge protection. It is only fire rated when used with the RGL ML1200 armature housing.
Code: ESAL110S
The Alpro AL110 ANSI High Security Mortice Electric Strike is an ANSI style electric strike complete with a stainless steel short or long face plate for use in metal or timber door applications. This AL110 electric strike is 12/24v selectable, weather resistant and has a holding force of 1,750kg (3,860lbs). It is reversible fail-safe and fail-secure.
Code: ML600MORT
The ML600 mortice maglock is a concealed locking solution for sliding internal doors. It can also be used on doors where a surface mounted electric lock cannot be fitted.
Code: ESAL150
The Alpro AL150 High Security Rim Electric Strike - 12/24V DC - Fail Safe/Secure is designed for use with the majority of popular rim latches used on timber door applications. It is reversible fail-safe and fail-secure.
Code: ELVORTEXL
The Z and L Brackets to suit AL2400LP Vortex; for use with Inward and Outward opening doors.
Code: ELVORTEX
The Alpro Vortex AL2400 monitored maglock is an environmentally friendly, 12-24VDC magnetic lock with a 1500kg holding force and dual monitoring.
Code: EL1200M
The Alpro EMS1200 High Security Compact Shearlock Magnet operates at 12/24V. It is monitored and maintains a holding force of 1200kg. Other benefits include built in PCB controller with switch selectable features and plug in 3 metre flying leads.
Code: SH2600
Surface Housing for the MSL2600 1200kg Shear Lock.
Code: ELEB1001
The Alpro EB1001 Electric Bolt - 12V DC - Fail Safe operates at 12V DC and allows for remote access and exit control of most timber, metal and UPVC doors. It is suitable for sliding or swing, single and double action operations. It can be fitted in the frame or in the door and comes with plug in LED bolt indicator as standard.
Code: ELEB250
The Alpro EB250 High Security Electric Bolt - 12/24V DC - Monitored solenoid bolt operates at 12/24V DC and allows for both remote access and exit control of most timber, metal and UPVC doors. It is also suitable for sliding or swing, single or double action operations. It can be fitted in the frame or in the door. With concealed mortise mounting and slim line styling the bolt suits most narrow stile aluminium doors and narrow profile joinery.