Intumescent ironmongery protection kits are essential to ensure full fire rating compliance for fire doors. We have intumescent lock jackets for our mortice locks and latches and we also have sheet intumescent that can be cut down to size too.
Ironmongery can be CE marked for use on fire doors but without using correct intumescent material with them, they are non-compliant with fire door regulations (unless stipulated in test evidence). Intumescent, which is usually made using graphite, provides a barrier between the timber in a door and the ironmongery and it expands when it comes into contact with heat to fill in any gaps around it and help to slow down the spread of a fire and smoke for a period of time.
It is extremely important that you choose intumescent material with the appropriate fire rating to correspond with the fire rating of the door itself for full fire door compliance. Please ensure that you read the descriptions of each product to check for the fire rating level achievable. If you would like any assistance or want to be extra sure, give our friendly and knowledgeable sales team a call on 01305 263300 or contact us through our website.
These Intumescent Hinge Pads are made from black graphite and suit 100mm/4" hinges.
Sold as either:
A pack of 6 plates to suit 3no hinges
Single units, where 2 intumescent hinge plates would be required to install with 1no hinge.
A universal intumescent kit to suit British Standard deadlocks or Fire Brigade Locks. (Lockcase not included).
This is an intumescent lock jacket to suit DIN standard mortice locks, made of black graphite. Select 60mm or 80mm backset.
This is an intumescent lock jacket to suit DIN standard lockcases, made of 1mm mono ammonium phosphate. Select 60mm or 80mm backset.
Lockcases are supplied separately.
This Borg Locks intumescent fire kit is for use with locks from their BL2500 and BL2700 range, on FD30 and FD60 fire doors.
This intumescent kit for the Abloy EA280 concealed door loop should be installed on timber fire doors to achieve an FD30 or FD60 fire rating.
A GEZE Single Action Fire Pack for Top Centre and Bottom Straps for use with the GEZE TS5 range of floor springs.
This Borg Locks intumescent fire kit is for use with locks from their BL5000 and BL7000 range, on FD30 and FD60 fire doors.
These 1mm Interdens intumescent hinge pads are for use with the Royde and Tucker H102 and H208 hi-load hinges. 2no pads are required per hinge.
A GEZE double action fire pack to suit both the top centre and bottom door stop.