KPX1000/2000 Proximity Fob
Code: FOB2000
The RGL KPX1000/2000 Proximity Fob for use with the KPX1000 and KPX2000 proximity keypads.
Read More
Door access control restricts who can enter an area or room in a building or who can use a particular resource. Basic access control comes in the form of mechanical digital locks which can be found in the Locks & Security section of our website. When looking for a more comprehensive access control solution; products such as electronic keypads and proximity readers, are the ideal choice. Once a system is installed access is easily structured and supervised by use of credentials – cards/fobs – which can be managed by online or offline software depending on the system. Our brands include ACT, Vanderbilt (Bewator) and Paxton.
There are different elements that make up access control systems and various factors that need to be considered when making a decision on what products will be required. A specifier will need to evaluate the following:
Keypads are a very common product in access control systems. They range from light duty to heavy duty and many are IP rated so suitable for external use (rain covers or surrounds may be required if they are in an area where they are exposed to the elements). Keypads are good for areas where a low level of security is required. They are a basic and convenient product to use for door entry and a cost effective solution for standalone doors.
The codes on keypads can be changed either by moving jumpers within the unit or by electronic programming - depending on the model. Keypads with jumpers are limited to up to two codes, whereas the electronic keypads can accommodate up to 500 user codes.
Some keypads can also incorporate a proximity reader so entry can be made by either presenting a fob, a card or pin entry. Sometimes keypads can require both a pin entry and a fob for an added layer of security. There are also units that use the keypad in order to programme the token on the door such as the KPX2000 and ACT5E Prox. These types of keypads utilise RFID (Radio Frequency Identification) Technology. Fobs, Cards and Tokens contain electronically stored data which is read by a reader, if presented within a certain distance of it. These tags operate on a radio length of between 120 and 150kHz and are programmed to the reader within the keypad which has a similar radio wavelength. The tag can switch between a lower and higher relative load and this produces a slight change that the reader can detect and identify. The keypad then communicates with the lock that it recognises this and ultimately unlocks the door. Weigand Readers like the RD-26 also work in this way.
Access control kits are complete access control solutions for doors. Our access control kits have been put together to make it easier for our customers to find a solution for them. The only additional item required is a keypad or proximity reader or an additional exit button (dependant on what you want for the door in question). We can also provide tailored quotations for access control, regardless of the size of the job. Our technical team are happy to help and our customers love that they can call us when on site to provide installation advice.
We stock a good range of exit buttons; DDA compliant ones, Narrow Style ones, Green Domed and can also source custom made ones if you’re looking for something in particular.
Most access control systems will require an emergency break glass unit; just in case the electric locking fails to operate correctly. One of the only times that this device is not required is when there is a Fail Secure Electric Strike or when there is an alternative exit route or it has been signed off by an authority (mental health facilities etc.). We also stock dual units; incorporating a push to exit button and an emergency break glass.
We have a range of regulated power supplies in 12VDC and 24VDC that can house rechargeable battery backup if required. All Power supplies have built in surge protection and are available in 1-5Amp units.
Transformer Rectifiers do not require battery backup and are ideal for use with electromagnetic door closers and hold open magnets. In the event that a fire alarm is activated, the transformer switches off the supply output to the closers or hold open devices and allows the door to close. The fire alarm system needs to be interfaced or a fire relay such as the RLFIRE should be used.
Relays are a type of electrically controlled switches. They can have a variety of uses but ultimately are used in situations where isolation of a component in an access control system is required or within a circuit as a form of protection device, breaking the circuit should the current be too high.
If you have a wireless exit button, you will require a transmitter to emit a signal and a receiver to read it and communicate with access control on a door. The transmitter sits within the button itself. Some transmitters like the TX26-E1 have a radio control button that emits a signal to a receiver. These can be used in applications such as gates, doors, barriers and lights.
Key switches are beneficial in access control situations where an easy system override is required. Key switches are either momentary (the key turns back after it is released) or maintained (the key remains in either an on or off position until turned back). Key switches can be placed within reception areas to allow control of the door and entry into the area or in conjunction with automatic operators.
Active filters
Code: FOB2000
The RGL KPX1000/2000 Proximity Fob for use with the KPX1000 and KPX2000 proximity keypads.
Code: EBGUS
An RGL Illuminated Green Emergency Break Glass Unit available in single pole, double pole, and triple pole. The Emergency Door Release text is permanently lit and will change to red on activation/alarm.
Code: DCE11A
A 12V DC Power Supply Unit with Switchmode technology. Select from the different amp options below. This unit can house a back up battery (sold separately).
Code: DCE241
A 24V DC power supply unit with switchmode technology. Select from the different amp options below. This unit can house two backup batteries (sold separately).
Code: DCE2A
A 24V DC Transformer Rectifier Power Supply, regulated power supply. It is not for use with back up battery and is ideal for use with hold open magnets.
Code: EBGBSS
RGL Green Dome Momentary “Press To Exit” Button for surface or flush fitting.
Code: EBGBWH
An RGL Green Dome Momentary “Press To Exit” Button for surface or flush fitting.
Code: CARD2000
The RGL KPX1000/2000 Proximity Card for use with the KPX1000 and KPX2000 proximity keypads.
Code: EKP1000
The RGL KP1000 Digital Keypad has a strong anti-vandal case with backlit buttons. It allows for up to 500 users and is surface mountable.
Code: KIT12SKP
A 12v DC Maglock Access Control Standalone Starter Kit for a Single Door with Keypad entry.
Code: RLFIRE
RGL Fire Relay 12V/24V with LED Indication for fire systems that require a low voltage switching output.
Code: KIT12SPR
A 12v DC Maglock Access Control Standalone Starter Kit for a Single Door with Proximity Keypad entry.
Code: KIT12M
The RGL 12v DC - Standalone Single Door Maglock Access Control Kit is a starter kit for a Single Door.
Code: EBWPTE
Rocker Switch Style Momentary “Press To Exit” Button.
Code: EBTF
RGL "Touch Free" Exit Device button with an illuminated sensor for hands free operation. The proximity sensor operates at a distance allowing for a hygienic no touch operation. Select from black or stainless steel finishes using the drop down menu.
Code: KSMA
Stainless Steel RGL Key Switches - Momentary and Maintained operation models with latching On/Off operation and supplied with 2 keys.
Code: EKP1000RS
This Showerproof Housing for RGL Keypads is compatible with the KP1000, KPX1000 and KPX2000 digital keypads.
Code: EBDUGD
A RGL Dual Unit - Green Dome “Press To Exit” button with Emergency Door Release dual unit.
Code: EKPX1000
RGL KPX1000 Digital Keypad with Proximity Reader and strong anti-vandal case with backlit buttons and a dual relay.
Code: EBDUTF
RGL Dual Unit - "Touch Free" Exit button with Emergency Door Release dual unit. The touch free sensor allows for a hygienic, no touch operation of this exit button.
Code: EBEXIT
RGL Large All Active Exit Button for surface or flush fitting.
Code: EBWPTEN
White Plastic Narrow Style Momentary “Press To Exit” Button.
Code: RLMULTI
This RGL multipurpose relay 9-30VAC/VDC input is ideal for high voltage/current switching. It has a 47mA current draw.
Code: EBWP66GR
An IP66 Rated Weatherproof Gate Release Large Green Exit Button for surface mounting and use with external access control systems.
Code: EBLPP04
A DDA Large Hardwired or Wireless Push to Open Button, fully compliant with BS8300.
Code: EBGKEY
RGL Green Emergency Break Glass Reset Keys - Pack of 10.
Code: EBWPWC02
An IP66 Rated Weatherproof Stainless Steel Press To Exit Button with a gasket for use with external access controlled doors and gates.
Code: LPEA280
The ABLOY EA280 Concealed Door Loop is a lead cover for doors that open up to 120 degrees.
Code: EBGBNSS
RGL Green Dome Momentary Press To Exit Button Architrave narrow style green dome momentary button for surface or flush mounting.
Code: RLEASY
A 12v DC Timer Relay 0-15 Seconds for use with access control systems where a delay is required to allow exit.
Code: EBSS25
A Vandal Resistant Square "Press to Exit" Button for internal use only.
Code: KIT12DPR
A 12v DC Maglock Access Control Standalone Starter Kit for a Double Door with Proximity Keypad entry.
Code: EKP50
RGL KP50 Heavy Duty Digital Keypad for external mounting with LED indication and backlit buttons.
Code: RLTIMER
A RGL Timer Relay 12/24V DC Input which can be set for times between 0.1 - 999 seconds.
Code: EKPX2000
The RGL KPX2000 Keypad with Proximity Facility has a strong anti-vandal case with backlit buttons. It allows for up to 500 users and is surface mountable.
Code: KIT12SKPESFL
A 12v DC Electric Strike Access Control Standalone Starter Kit for a Single Door with Keypad entry.
Code: EBJS01
A DDA Compliant Architrave Push to Open Button with a push plate and easy to clean surface. The unit is durable and has the words "Push to Open" written on it.
Code: EBSSB
An RGL Narrow Style Vandal Resistant Momentary “Press To Exit” Button for surface or flush fitting.
Code: EBWP66PTO
A IP66 Rated Weatherproof Press To Open Large Green Exit Button for use with external access control systems.
Code: RL12
A 12V AC/DC 24hour, 7 day Programmable Timer with LED indication.
Code: EBLPP
RGL Large All Active Disabled Push Pad with “Push To Open” button with stainless steel backbox.
Code: EBDUKS
A Dual Unit Key Switch Maintained and Emergency Break Glass for secure control of an exit door.
Code: KIT24M
The RGL 24v DC - Standalone Single Door Maglock Access Control Kit for a Single Door.
Code: RL04
These 12/24V DC, 4 & 8 Individually Fused Outputs have LED Indication for Power Input and Output Active. These output modules allow for a single output from a power supply to be split into either 4 or 8 equally fused outputs.
Code: RL2412
This Voltage Regulating Module 24V - 12V DC can be used with power supplies to reduce the voltage from 24V DC down to 12V DC. This means that products that can only use 12V DC Power supplies, can be used within a 24V DC access control setup.
Code: KIT12DKP
A 12v DC Maglock Access Control Standalone Starter Kit for a Double Door with Keypad entry.
Code: KIT12SBLE
A Standalone Single Door Maglock Access Control Kit with Bluetooth/Wifi proximity keypad. Choose fire rated or non-fire rated from the menu below.
Code: EBGBNWH
An RGL Narrow Style White Plastic Green Dome Momentary “Press To Exit” Button for surface or flush fitting.
Code: EKPX75
The RGL KPX75 Narrow Style Digital Keypad & Proximity Reader has a strong anti-vandal case with backlit buttons. It allows for up to 1000 users, is surface mountable and IP65 weatherproof rated.
Code: EBIEPS
A Press To Exit with Illuminated Button that is suitable for flush fitting. IP68 rated for internal and external use.
Code: DCEPS1
This 12V DC CCTV Encapsulated Power Supply has an eco casing design that is both efficient and environmentally friendly, for use with CCTV equipment.
Code: EBTRANS1
The TX26-E1 1 Button Transmitter is a single channel transmitter with a range of up to 250 meters in open field.
Code: EPRD26
RGL RD-26 Weigand Reader to suit KPX2000.
Code: EBNANO
Nano Single Channel Receiver - Part of a range of radio control and switching products to provide wire-free control of gates, barriers, doors, lights etc.
Code: EKPX50
The KPX50 Heavy Duty Electronic Proximity Keypad is made from stainless steel and is vandal resistant.
Code: EBWLS
A Large White Plastic Press To Exit Button with a retractable switch (momentary operation) - for internal use only.