Graphite Intumescent Hinge Pads - Self-Adhesive
Code: XB8452XX/SA
These 1mm self adhesive graphite intumescent hinge pads are for installation with 100mm/4" fire door hinges.
2no pads are required per hinge.
Read More
This section of the website is designed to provide you with peace of mind in selecting the right product for your fire door. These fire door essentials are all CE marked and fully compliant for use on fire doors. Choose from fire rated door closers, fire rated locks and latches, fire rated lever handles, appropriate fire door signage and intumescent to ensure your fire door’s integrity and rating is maintained.
Active filters
Code: XB8452XX/SA
These 1mm self adhesive graphite intumescent hinge pads are for installation with 100mm/4" fire door hinges.
2no pads are required per hinge.
Code: XB8451XX
These Intumescent Hinge Pads are made from black graphite and suit 100mm/4" hinges.
Sold as either:
A pack of 6 plates to suit 3no hinges
or
Single units, where 2 intumescent hinge plates would be required to install with 1no hinge.
Code: TS73EMF
The DORMA TS73EMF is a rack and pinion electromagnetic door closer available with hold open (TS73EMF) or swing free functionality (TS73EMFS).
Code: XB8471XX
A universal intumescent kit to suit tubular mortice latches (Latch not included).
Code: DCD68
The DORMA TS68 EN2-4 Door Closer is a rack and pinion overhead door closer suitable for parallel arm and frame fitting. This unit is non-handed and in a silver finish. It is tested to BS EN 1154, for fitting to standard internal doors.
Code: ESAL900FR
The AL900 electric strike is 12/24V AC/DC selectable, fail safe/ fail secure reversible and fire rated for use on FD30 and FD60 doors.
The fire rated option comes supplied complete with the 1mm intumescent kit.
Code: DORGARDB
The Dorgard fire door retainer is a BS EN 1155 compliant, wire-free solution for legally holding open fire doors that you can install in under 5 minutes.
Select from black or white finish housing (floor fixing foot not included).
Code: XB8466XX
Intumescent Flush Bolt Kit for use with lever action flush bolts.
Code: XB8440XX/SA
These 1mm self adhesive Interdens intumescent hinge pads are for use with 100mm / 4" fire door hinges. 2no pads are required per hinge.
Code: XB8465XX
This is an intumescent lock jacket to suit DIN standard mortice locks, made of black graphite. Select 60mm or 80mm backset.
Code: XB8490XX
These 1mm Interdens intumescent hinge pads are for use with the Royde and Tucker H102 and H208 hi-load hinges. 2no pads are required per hinge.
Code: XB8467XX
A selection of Intumescent Kits to suit various British Standard sashlocks and deadlocks. (Lockcase not included).
Code: DORSMARTB
The Dorgard SmartSound Fire Door Retainer is a wire-free solution for legally holding open fire doors. Select either a black or white finish.
Code: ML350-IK
This 1mm intumescent lock kit is for use with the GEM ML350 electric lock when installed on FD60 rated fire doors.