Alpro Vortex AL2400 Monitored Maglock - 12/24V DC
Code: ELVORTEX
The Alpro Vortex AL2400 monitored maglock is an environmentally friendly, 12-24VDC magnetic lock with a 1500kg holding force and dual monitoring.
Read More
Electric door locks are an essential part of an access control system and we supply a range of valuable solutions for securing the doors in your building. When combined with proximity readers or keypads these systems result in improved control of access to your building. Door Controls Direct offers systems to suit every budget and work with you to meet your particular security requirements; including the most extensive range of locks, bolts and strikes. We partner with the leading suppliers and manufacturers, such as Adams Rite, Alpro and Assa Abloy to provide electronic security devices available in 12V or 24V in both AC and DC.
Maglocks are a very common and popular electric locking product. They are very easy to install and often surface mounted. There are a range of maglocks available with a variety of holding forces and are great for low security applications. Some, like the Adams Rite MS Maglock (ELMSMAG) offer greater security than others and these have hardened steel mandibles that clamp onto the armature plate should forced entry be attempted. All maglocks operate as “Fail Safe” units.
Electric Strikes are an alternative to a maglock. You might choose an electric strike over a maglock for aesthetic reasons, but you might also choose one if you would rather that the door was “Fail Locked/Fail Secure” when power is cut. A lot of electric strikes offer both options and it’s a simple case of moving a screw in the body of the strike to change the operation. We supply a variety of 12V DC and 24V AC/DC strikes that can be morticed or rim mounted (product dependent). Some are heavier duty than others, so it’s really important that you consider the amount of traffic that will be passing through the door.
Solenoid Bolts are a great product to use on aluminium doors where a high level of security is required. A sensor on the unit detects when the door and lock are in alignment and throws the bolt which secures the door. When power is removed, the bolt retracts and allows for safe exit through the door. The bolts can be installed either vertically or horizontally in the door frame which is generally easier to get power to than if it were installed in the door itself.
Solenoid Locks offer an even greater level of security than a solenoid bolt as the solenoid engages with the handle to control access. When enabled, the solenoid engages within the handle, allowing the handle to operate the latch and open the door.
Motor Locks function in the opposite way to a solenoid lock. The deadbolt is already engaged in the door frame but when a fob is presented to the reader or a code is entered on the door keypad; the motor in the lock retracts the deadbolt, generally providing a higher level of security.
Electromagnetic shear locks are similar to maglocks but are generally higher security as they have a physical locking element to them as well. There are integral contact sensors within the lock and armature plate and when these are about 3mm from each other, they pull together and create a “shear” locking force. They are ideal for use on double swing doors.
A pin in the centre of the lock prevents any slide movement and there is also an “Anti-Residual Button” located on the armature plate.
Active filters
Code: ELVORTEX
The Alpro Vortex AL2400 monitored maglock is an environmentally friendly, 12-24VDC magnetic lock with a 1500kg holding force and dual monitoring.
Code: EL561
The Abloy EL561 Solenoid Lock 12/24V DC is suitable for use on wooden or metal doors and has a 65mm backset. Fire rated and non-fire rated versions available.
Code: ML350-12
The GEM ML350 Electric Lock is available with either a 12V DC or 24V DC operating voltage and has options for fire rated and non-fire rated doors. It's high preload capacity provides a smooth operation under varying loads on the door.
Code: ELEB1001
The Alpro EB1001 Electric Bolt - 12V DC - Fail Safe operates at 12V DC and allows for remote access and exit control of most timber, metal and UPVC doors. It is suitable for sliding or swing, single and double action operations. It can be fitted in the frame or in the door and comes with plug in LED bolt indicator as standard.
Code: ELEB250
The Alpro EB250 High Security Electric Bolt - 12/24V DC - Monitored solenoid bolt operates at 12/24V DC and allows for both remote access and exit control of most timber, metal and UPVC doors. It is also suitable for sliding or swing, single or double action operations. It can be fitted in the frame or in the door. With concealed mortise mounting and slim line styling the bolt suits most narrow stile aluminium doors and narrow profile joinery.
Code: EL351U12
The Abloy effeff 351U80 Electric Lock 12V & 24V DC for single or double action doors, including escape doors; enables remote locking and unlocking. It is fail unlocked and the distance between the strike and the striking plate is adjustable. It is monitored through a depressable snib.
Code: ES400
The CDVI i400SR DIAX 400kg External Surface Electromagnetic Lock, is 12/24V DC switchable and is supplied with full fixing kit. This version is monitored.
Code: MLS300
The DIAX V3SR Illuminated Electromagnetic Lock has illuminated ends for quick glance door status indication, is monitored, and a 300kg holding force.
Code: ES500
The CDVI i500SR DIAX 500kg External Surface Electromagnetic Lock is 12/24V DC switchable and is supplied with full fixing kit. This version is monitored.