ARROW 624EM Electromagnetic Hold Open/Swing Free Door Closer
Code: DCF97
The ARROW 624EM electromagnetic hold open/swing free door closer operates at 24V DC and has a plug in cable loop. Fixed power size EN 4. Universal fitting.
Read More
If you have a fire door, you will need fire door ironmongery. Specifying the right ironmongery and door hardware is crucial to ensure that the fire rating of a door is maintained and, for the safety of the building’s occupants. The ironmongery in this section of the website is specifically for use on fire doors; the products are CE Marked and Certifire approved and comply with relevant British Standards.
BS EN 1634 Standard
BS EN 1634 is a European fire test standard for all fire door CE Marked ironmongery products. Anything CE marked must also Fire Doors in the UK are typically tested with just three fire rated products: 3 hinges, a door closer and a lock or latch. The bolt in a lock is wired back so that this does not contribute to holding the door closed. This then allows for the door manufacturer to be able to test two key points at the same time:
A fire door must prove that it can withstand a fire attack for a specified amount of time, in order to successfully achieve its fire rating. This means that hot gasses and flames are not to pass through for the duration of a fire test. E.g. FD30 doors should have a 30 minute fire resistance and are tested for 36 minutes, FD60 Doors should have a 60 minute fire resistance and are tested for 67 minutes. This is known as Fire Door Integrity.
Fire Door Integrity does not include the passage of smoke and at the beginning of a fire test, smoke is pushed through the gaps between the door and frame and the meeting styles on a pair of double doors. Any intumescent that is fitted to these doors then expands and fills the gaps to reduce the passage of smoke through the door to 0 until the end of the expected fire rating where the door warps and burns completely.
Fire Rated Hinges
Fire doors should be fitted with 3no. 102mm hinges that are CE marked under Fire Regulations. Fitting 3 hinges will also help stop the door from warping – for extra tall doors over 2200mm, four hinges may be used to prevent this. Occasionally 2 hinges may be used but only with supporting fire test evidence. Fire door hinges must remain attached to the door during a fire test, even if the timber around them is charred. Some steel and Brass hinges are acceptable for use on FD30 30-minute fire doors whilst only steel hinges should be use on FD60 60-minute fire doors. Under BS EN1935:2002, any hinges fitted to a fire door, must be able to achieve the appropriate fire rating. They must also not impede any door closers that may be fitted to the doors and overcome any seals and resistance from latches. Intumescent hinge pads should be used with all hinges on fire doors, even if they are CE Marked, or full compliance with fire ratings.
Fire Rated Door Closers
All door closers fitted to a fire door, whether concealed or overhead, must be CE Marked and suitable for the fire rating of a door. You must not install any ironmongery that has a fire test rating lower than that of the door. For example, if you have a 60-minute fire rated door, you cannot install anything that has a lower fire rating like products with a 30-minute fire rating. You can, however, install a 60-minute fire rated product on a 30-minute fire rated door.
Door Closers should be performance tested to EN1534 and Fire Tested to EN1634 in order to be CE marked. They should also be a minimum of a power size 3 (EN3) when fitted to a fire door.
If a door is to be held open, then an electromagnetic door closer linked up to the fire alarm interface should be used.
Digital Locks
There is no performance test to which Digital Locks should comply, however fire rated digital locks should be supplied with appropriate intumescent and be fire tested to EN 1634 and EN 476.
Locks & Latches Locks
Any lock or latch installed on a fire door must be CE Marked and tested to BS EN 12209. Fire Rated mortice locks and latches can be installed with intumescent jackets and any cut made into the door to accommodate them must be minimal.
Fire Rated Intumescent
Intumescent Seals have an important job of expanding to fill gaps around the edge of the doors to prevent the spread of smoke and fire. It contributes to the fire rating of a door as it slows down the ability of flames to pass through the door. When a fire door and seals are fitted correctly, any gaps around the top and sides should be less than 4mm thick – the seals will expand to fill these in the event of a fire.
Any hinges and morticed locks and latches should be installed with appropriate intumescent sheets or pads. These act as a barrier between the product and the door to ensure that heat transfer is delayed. Always check the fire test certificates to ensure full compliance with any given fire rating.
Fire Rated Accessories & Signage
Accessories on Fire Doors must not affect the integrity of a fire door. There are products like door viewers for example, that have been fire tested with intumescent that are appropriate for use on such doors.
Signage for fire door is mandatory and falls under BS 5499-5:2002 Approved Document B. All fire doors must display signs that either read “Fire Door Keep Locked” or “Fire Door Keep Shut” depending on the function of the door. There are no performance standards for signage, and they should be face fixed to the fire door.
Fire Rated Lever Handles
Fire Rated lever handles should conform to BS EN1906 – the British Standard for Door Furniture. This standard covers all door furniture with backplates or roses. There does not necessarily need to be a CE marking but the handle set should have been put through fire testing and given a Grade 3 for durability and a Grade 1 for Fire Rating.
Fire Rated Pull Handles
Pull Handles, although are never CE Marked, should be tested under BS 476, which is the British fire test standard on building materials and building structures. BS EN476 grades the level of resistance that an ironmongery product has, using a class system. During this test, products are set alight with a pilot flame and then extinguished after 1 minute. The material of the product might start to burn and the test ends when either the flame front reaches a 825mm reference point or after 10 minutes – whichever comes first. The flame is then classified according to the time that the flame crosses certain reference points, the extent of flame spread during the first 1.5minutes of the test, the maximum distance the flame spread (10 minute/825mm limit) and the time taken for the flame to spread.
Intumescent Letterboxes
If you must install a letterbox on a fire door, you must only use an intumescent letterbox so as not to affect the integrity of the fire door.
Active filters
Code: DCF97
The ARROW 624EM electromagnetic hold open/swing free door closer operates at 24V DC and has a plug in cable loop. Fixed power size EN 4. Universal fitting.
Code: HB1568SS
The ARRONE AR8187 Grade 13 Ball Bearing Fire Door Hinges are high performance, low friction ball-bearing hinges. They are BS EN 1935: 2002 Grade 13, fire-rated, and suitable for a maximum adjusted door weight of up to 120kg.
Select either square or radiused corners.
Hinges are sold as singles, not pairs, complete with fixings.
Code: XB8452XX/SA
These 1mm self adhesive graphite intumescent hinge pads are for installation with 100mm/4" fire door hinges.
2no pads are required per hinge.
Code: XB7321WE
Our Intumescent Fire & Smoke Seals - 2100mm length (with brush) have been extensively tested to the latest British standards BS 476 part 22 & part 31.1. They are also Certifire Approved, no. CF846.
Sold in packs of 25no lengths. Priced as single lengths.
Code: NB2801PS
A 75mm diameter Fire Door Keep Shut Sign in polished stainless steel.
Code: XB7310WE
This Intumescent Fire and Smoke Seal (with brush) – 1050mm length, helps to prevent the spread of smoke and fire through the gap between the door frame and the door perimeter. When exposed to heat, the graphite expands to fill this gap, whilst the brush stops the passing of smoke.
Sold in packs of 25no lengths. Priced as single lengths.
Code: TS4000EFS
The GEZE TS4000EFS is an overhead door closer for single-action doors up to 1400mm wide. It is fire rated, features an adjustable power size and is suitable for doors up to 120kg. This door closer is energy efficient, easy to maintain, and suitable for diverse settings.
Code: DCB9961
The Briton 996 door closer has hold open or swing free function and can be used on fire doors. Select different power sizes and applications below.
Code: NB2802SS
A 75mm diameter Fire Door Keep Locked Sign in satin stainless steel.
Code: XB8451XX
These Intumescent Hinge Pads are made from black graphite and suit 100mm/4" hinges.
Sold as either:
A pack of 6 plates to suit 3no hinges
or
Single units, where 2 intumescent hinge plates would be required to install with 1no hinge.
Code: TS4000E
The GEZE TS4000E hold open electromagnetic door closer is a surface mounted door closer with adjustable power size. It is suitable for doors up to 120kg and up to 1400mm wide.
Code: DCB1110
The Briton 1110 door closer is template adjustable size 2-4 and can be used on fire doors. This overhead door closer has adjustable closing speed.
Code: NB2803SS
A 75mm diameter Automatic Fire Door Keep Clear Sign in satin stainless steel.
Code: DCG4000
The GEZE TS4000S EN 1-6 / EN 5-7 Door Closer is a heavy duty overhead door closer with a 120 minute fire rating. It is approved for use on doors with leaf widths up to 1400mm (EN 1-6) or 1600mm (EN 5-7). The closing speed and latching action are adjustable and it comes with back check and delayed action.
Code: DCB2003V
The Briton 2003V overhead door closer is power size 2-4, can be used on fire doors and suits doors up to 1100mm. It has adjustable closing speed.
Code: DCH8200SE
The Arrone AR8200 door closer is Certifire Approved with CE and UKCA marks. It is template adjustable EN 2-4 and is suitable for universal fitting.
Code: KP123S
A satin or polished stainless steel push plate available in various sizes. Choose size, finish, and square or radiused corners.
Code: DCF94
The ARRONE AR450 Size 3 Door Closer is a fixed strength door closer. It is suitable for light duty internal doors and fire door applications. This is a great low budget door closer.
Code: DLH195
The AR195 digital lock is a value engineered access control solution. It is supplied with a tubular latch, has an optional holdback function, and allows for codes between 4-7 digits. It is suitable for 30 minute fire rated doors when fitted with intumescent.
Code: DHEM24
The Geofire Electromagnetic door holder is designed to hold open fire doors connected to the fire alarm - available in 24V DC or 240V AC.
Code: FC2063SS
Stainless Steel Pull Handles, supplied complete with bolt fixings.
Code: FC2000SS
The ARRONE AR961 19mm diameter Grade 304 Stainless Steel Safety Door Lever Handle on Rose, comes complete with both wood screws and bolt through fixings.
Code: XB7021WE
This Intumescent Fire Seal - 2100mm length is an essential product to maintain the fire rating of a fire door. It prevents the spread of fire through the gap between the door edge and the door frame.
Sold in packs of 25no lengths. Priced as single lengths.
Code: TS73EMF
The DORMA TS73EMF is a rack and pinion electromagnetic door closer available with hold open (TS73EMF) or swing free functionality (TS73EMFS).
Code: NB2801SS
A 75mm diameter Fire Door Keep Shut Sign in satin stainless steel.
Code: LB0116SS
ARRONE AR8100 Euro Profile Sashlock with a DIN standard 60mm backset.
Code: FC2043SS
The ARRONE AR961/67 Stainless Steel Euro Profile Escutcheon is a grade 304 stainless steel euro profile escutcheon complements the AR961 lever on round rose door furniture.
Code: BB7008SS
This fire rated stainless steel lever action flush bolt is available with radius or square faceplates and in a variety of sizes. Select from the drop down menus below.
Code: LB6256SS
The ARRONE AR8019 Heavy Duty Tubular Mortice Latch is suitable for sprung and some unsprung lever furniture. Comes complete with both Satin Chrome and Polished Brass forends and strike plates.
Code: XB8471XX
A universal intumescent kit to suit tubular mortice latches (Latch not included).
Code: DCG1500
The GEZE TS1500 EN 3/4 Door Closer is a surface mounted rack & pinion overhead door closer which is approved for use with single-action doors with leaf widths of up to 1100 mm and for use on smoke and fire doors. The closing speed (3-4) and latching action are adjustable.
Code: DCG2000NVBC
The GEZE TS2000NVBC EN 2-4 Door Closer is a rack & pinion overhead door closer which is approved for use on single action doors with leaf widths of up to 1100 mm and suitable for smoke and fire doors. It comes with variable Power Size EN 2-4 and adjustable closing speed, latching action and backcheck.
Code: NB2401PA
A 75mm diameter Fire Door Keep Shut Sign in satin anodised aluminium.
Code: IB2107SE
The TOP37 Rebated Drop Down Acoustic Door Seals are a rebated model for timber doors. They have been acoustically tested to achieve up to 37dB Rw.
Code: DCD68
The DORMA TS68 EN2-4 Door Closer is a rack and pinion overhead door closer suitable for parallel arm and frame fitting. This unit is non-handed and in a silver finish. It is tested to BS EN 1154, for fitting to standard internal doors.
Code: IBT726
The Trend rebated drop down seal is available in a variety of lengths. It is trimmable by up to 200mm, with a maximum drop of 14mm, and is fire tested to FD60.
Code: DCH1500SE
The ARRONE AR1500 EN2-4 Door Closer is dual handed and suitable for universal door applications. It has adjustable closing and latch speed and a 120 minute fire rating. It is a power size 2-4 and comes with backcheck; meaning that it is suitable for high traffic doors. This closer is low budget and extremely versatile.
Code: DCH5500SE
The ARRONE AR5500 is a heavy duty EN2-5 Overhead Door Closer, suitable for use on Fire Doors.
Code: ESAL900FR
The AL900 electric strike is 12/24V AC/DC selectable, fail safe/ fail secure reversible and fire rated for use on FD30 and FD60 doors.
The fire rated option comes supplied complete with the 1mm intumescent kit.
Code: DORGARDB
The Dorgard fire door retainer is a BS EN 1155 compliant, wire-free solution for legally holding open fire doors that you can install in under 5 minutes.
Select from black or white finish housing (floor fixing foot not included).
Code: LB1976SC
The ARRONE AR7006 Euro Profile Mortice Deadlock Case is a euro profile mortice deadlock case, complete with a heavy duty brass deadbolt and bolt through fixing holes.
Code: XB8466XX
Intumescent Flush Bolt Kit for use with lever action flush bolts.
Code: EK3535-MP5-SCP
The MP5 5 Pin Euro Key & Thumbturn Cylinder is a 70mm or 80mm 5 pin euro profile cylinder with thumbturn and 3 keys.
Code: FC20469SS
The ARRONE AR961/69D Stainless Steel Disabled Turn & Indicator grade 304 stainless steel bathroom turn, complements the AR961 lever on round rose door furniture. It has a 52mm diameter with 38mm fixing centres and it is supplied with a 5mm spindle and wood screws.
Code: XB8465XX
This is an intumescent lock jacket to suit DIN standard mortice locks, made of black graphite. Select 60mm or 80mm backset.
Code: XB8490XX
These 1mm Interdens intumescent hinge pads are for use with the Royde and Tucker H102 and H208 hi-load hinges. 2no pads are required per hinge.
Code: DLH525
The ARRONE AR525 & AR526 Fire Rated Mechanical Digital Locks are robust push-button mechanical digital locks suitable for internal and external applications.
Code: LB0196SS
ARRONE AR8101 Upright Latch DIN euro profile with a 60mm backset.
Code: FG2010PB
The ARRONE AR461/10 Polished Brass Lever On Round Rose PVD brass safety lever on a sprung round rose with 19mm diameter handle.
Code: DCB121SCE
The Briton 121 CE EN 3 Door Closer is a fixed power size EN3 door closer. It is a low duty, low budget door closer in a silver finish.
Code: IB2117SA
These Applique Surface Drop Down Acoustic Door Seals are surface mountable and acoustically tested achieving up to 37dB Rw. They are suitable for use on FD60 (60 minute) timber fire doors.
Code: DCH3500SE
The ARRONE AR3500 EN2-4 Overhead Door Closer is dual handed and suitable for universal door applications. This overhead closer has backcheck, delayed action plus adjustable closing and latching speed.
Code: LB0146SS
ARRONE AR8103 Bathroom Lock has a 60mm backset and 78mm DIN standard centres. This bathroom lockcase is pierced to accept bolt through furniture.
Code: LB1876SC
The ARRONE AR7004 Euro Profile Mortice Sashlock Case is a euro profile mortice sashlock case, complete with bolt through fixing holes and a brass deadbolt. It is suitable for sprung and most unsprung door furniture.
Code: LB4946SS
The ARRONE AR8023 Mortice Bathroom Lock Case has a 5mm bathroom turn spindle follower, bolt through fixing holes and a brass deadbolt. It has a 67mm or 80mm case size and is suitable for sprung and most unsprung door furniture.
Code: XB7010WE
This Intumescent Fire Seal - 1050mm length expands when it comes into contact with fire to fill the gap between the door perimeter and the door frame. It is an essential product to maintain a fire door rating and for the safety of a building's occupants.
Sold in packs of 25no lengths. Priced as single lengths.
Code: LB0136SS
ARRONE AR8102 Deadlock is a DIN standard deadlock case that is pierced to accept a euro profile cylinder, and has a 60mm backset.
Code: IBA730
The Applic drop down seal is available in a variety of lengths. It is surface mounted, with a maximum drop of 15mm, and is fire tested to 60 minutes.
Code: FC31609SS
The ARRONE AR361/11 19mm diameter Lever Latch Door Handle on Backplate is a 19mm diameter satin stainless steel lever latch backplate furniture. This product is supplied with wood screws.
Code: FC31607SS
The ARRONE AR361/13 Stainless Steel Euro Lever Lock Handle on Backplate is a 19mm diameter satin stainless steel euro lever lock backplate furniture. This product is supplied with wood screws and bolt through fixings. It has 47.6mm centres.
Code: FC4000SS
A ZOO ZPS030 Grade 304 Stainless Steel Sprung Door Lever Latch Handle on Round Rose satin stainless steel safety lever latch handle on a sprung round rose.
Code: XB8467XX
A selection of Intumescent Kits to suit various British Standard sashlocks and deadlocks. (Lockcase not included).
Code: XB8121BL
These Corner Acoustic Perimeter Seals dramatically improves the effectiveness of a doorset assembly by reducing noise, smoke and air movement between the gap between the door perimeter and the door frame. These acoustic seals are fully compliant with Approved Document E and are super easy to fit.
Code: NB2402PA
A 75mm diameter Fire Door Keep Locked Sign in satin anodised aluminium.
Code: XB8478XX
The Abloy INPK-DIN-65 intumescent lock jacket is designed for use with the EL560 solenoid lock when installed on FD60 rated timber fire doors.
Code: XB8479XX
This intumescent kit for the Abloy EA280 concealed door loop should be installed on timber fire doors to achieve an FD30 or FD60 fire rating.
Code: XB8440XX/SA
These 1mm self adhesive Interdens intumescent hinge pads are for use with 100mm / 4" fire door hinges. 2no pads are required per hinge.
Code: NB1931XX
A Push Bar To Open sign with white text and tick symbol on a green background. For installation with panic exit hardware on final exit doors.
Code: DLB5401
The Borg BL5401 & BL5701 ECP Easicode Pro Digital Locks come with lever handle operation and are a good access control solution for medium to heavy duty doors.
Code: FC4300SS
A pair of Eurospec CSL1194 Grade 304 Stainless Steel T-Bar Door Lever Handle on Round Rose. These stainless steel door handles are available in a polished or satin stainless steel finish.
Code: FB4001SA
A pair of ZOO ZAA030SA Aluminium Safety Door Lever Handle on Round Rose return to door design lever handles on a screw on round rose. Satin anodised aluminium finish.
Code: FC4400SS
A pair of Eurospec SW4123 19mm Diameter Grade 316 Stainless Steel Safety Door Lever Handle on Rose return to door design lever handles on a sprung round rose. Unlike many lever handles, these are tested to EN1906 Grade 4.
Code: NB2403PA
A 75mm diameter Automatic Fire Door Keep Clear Sign in satin anodised aluminium.
Code: NB1411XX
A rectangular Fire Exit Keep Clear Vinyl Sign 150mm x 450mm with a running person pictogram and white text on a green/blue background.
Code: FC9000SS
A pair of HOPPE SECUSAN Paris Stainless Steel Door Lever Handles on round rose in the HOPPE SecuSan antibacterial, antimicrobial finish.
Code: FC31602SS
The ARRONE AR361/12 19mm diameter Stainless Steel Lever Lock Handle on Backplate is a 19mm diameter satin stainless steel lever lock backplate furniture with 57mm centres. This product is supplied with wood screws and bolt through fixings.
Code: XB60DIN
This is an intumescent lock jacket to suit DIN standard lockcases, made of 1mm mono ammonium phosphate. Select 60mm or 80mm backset.
Lockcases are supplied separately.
Code: FC9043SS
A HOPPE SECUSAN Stainless Steel Euro Profile Escutcheon with an antibacterial, antimicrobial finish, to complement the Paris range of door furniture.
Code: XB10DPW
This pack contains 5no 1050mm lengths of brush fire and smoke intumescent strips to suit a single timber fire door.
Select white or brown finish, and 10mm x 4mm, or 15mm x 4mm.
Code: FC2010SS
The ARRONE AR963/60 stainless steel straight lever on a sprung round rose with 19mm diameter handle. Manufactured from Grade 304 stainless steel.
Code: DLB2501
The Borg BL2501 ECP Easicode Pro Digital Lock is a great choice for extra security for light to medium duty doors. It has a paddle handle on the inside for easy exit.
Code: DLB2701
The Borg BL2701 ECP Easicode Pro Digital Lock mechanical digital lock is a great choice for light to medium duty doors and is suitable for doors from 30-60mm thick.
Code: FC7030SS
The ZOO VS030 Grade 304 Stainless Steel Door Lever Handle On Round Rose is a stainless steel safety lever on an unsprung round rose.
Code: NB2802PS
A 75mm diameter Fire Door Keep Locked Sign in polished stainless steel.
Code: FC31604SS
The ARRONE AR361/15 Stainless Steel Bathroom Lever Handle on Backplate is a 19mm diameter satin stainless steel bathroom lever latch backplate furniture.
Code: FC9066SS
HOPPE SECUSAN Stainless Steel Pull Handles with an antibacterial, antimicrobial finish.
Code: KP143SEC
A HOPPE SecuSan stainless steel push plate with an antibacterial, antimicrobial finish for hygienic door operation.
Code: FC4200SS
The ZOO ZPS080 Grade 304 Stainless Steel Sprung Door Lever Latch Handle on Round Rose satin stainless steel safety lever on a sprung round rose with 22mm diameter handle.
Code: NB1930XX
A Push Bar To Open sign with white text and push pictogram on a green background. For installation with panic exit hardware on final exit doors.
Code: FC90469SS
A HOPPE SECUSAN Stainless Steel Large Turn & Release complements the Paris lever handles. Supplied in satin stainless steel with antibacterial & antimicrobial finish.
Code: DCA625SE
The Arrow 625EM is a fixed power size EN 5 overhead door closer that can be installed on the push or pull side of fire rated doors. It has hold open and swing free function.
Code: DORSMARTB
The Dorgard SmartSound Fire Door Retainer is a wire-free solution for legally holding open fire doors. Select either a black or white finish.