The Dorgard Fire Door Retainer is a BS EN155 compliant, wire-free solution for legally holding open fire doors; that you can install in under 5 minutes.Read more
|5||4.47%||£85.50 VAT excl.|
|10||7.82%||£82.50 VAT excl.|
The Dorgard Fire Door Retainer allows fire doors to be held open in a safe and legal manner, whilst ensuring that the door will close in the event of a fire. The door can be held open at any angle of choice and a rubber plunger keeps it in place through constant contact with the floor. The Dorgard has a built in audio-electronic device which will cause the plunger to retract when the fire alarm is activated, thus closing the door and ensuring fire safety is maintained.
- Suitable for 120 minute fire doors up to 1600mm wide.
- Suitable for doors up to 160kg.
- Less than 5 minutes installation time.
- Tested and Certified to BS EN 1155:1997 & BS EN 1634.
- The unit is completely wireless and is supplied with 2 x Size C Alkaline Batteries.
- Works in conjunction with an existing fire alarm system but not hardwired so cost and time effective.
- Will hold the door in any selected angle.
- Dorgard automatically releases the fire door upon hearing the fire alarm.
- Frequently installed in education and healthcare buildings including schools, hospitals etc.
- Aesthetically pleasing – discreet with a smart finish.
- Foot-Operated – setting and manual release.
- Supplied complete with an Automatic night-time release feature.
- Ideal for areas where an electromagnetic door closer cannot be installed.
The GEZE TS2000NVBC EN 2-4 Door Closer is a rack & pinion overhead door closer which is approved for use on single action doors with leaf widths of up to 1100 mm and suitable for smoke and fire doors. It comes with variable Power Size EN 2-4 and adjustable closing speed, latching action and backcheck.
The GEZE TS4000 EN 1-6 & EN 5-7 Door Closer is a very heavy duty overhead door closer; approved for use with left and right single-action doors with leaf widths up to 1400mm and for mounting on fire and smoke protection doors. The closing speed (1-6) and latching action are adjustable and it comes with back check and delayed action.
The Briton 533 24V DC Electromagnetic Door Holder is a 24V DC Electromagnetic Door Holder with a 200N holding force. This product has a silver finish and is flush mountable. Backing Box available separately for surface mounting.
The DORMA EM500A - 24V DC Electromagnetic Door Retainer is an electromagnetic hold open door retainer that is suitable for use with overhead door closers and floor springs.
The ARRONE AR8187 Fire Rated Grade 13 Ball Bearing Hinge is a high performance, low friction ball-bearing hinge. It is Grade 13, fire-rated and suitable for a maximum adjusted door weight of up to 120kg. This hinge measures 102mm x 76mm and has a satin stainless steel finish.
The ARROW 800 Series Electromagnetic Door Holder operates at 24V DC. It has a 200NM Holding force and has a silver finish.
A 75mm diameter Automatic Fire Door Keep Clear Sign in a choice of four finishes.