Briton 370PLM Exit Latch Fixing Kit for Metal Doors
The Briton 370PLM fixing kit is the essential accessory for securely installing select Briton emergency exit latches on metal doors. Designed to aid compliance with escape route regulations, this fixing pack is ideal for applications in commercial, public, and residential buildings with metal doors.
Whether you're upgrading existing doors or fitting new panic hardware, this pack provides the right fixings for metal doors.
Key Product Features:
- 370PLM
- Fixing kit for use on metal doors
- Compatible with the Briton 378, 377 and 1438 models
- Supports EN 1125 and EN 179 compliant products
- Screw pack included
Compatible Briton Exit Devices
Each device this kit supports is designed for different user environments:
- The Briton 378 is suitable for single doors where large volumes of untrained users are likely, such as in schools or hospitality venues.
- The Briton 377 suits double rebated doors and offers a reliable panic exit function for busy public spaces. This two part set includes both a panic bolt and a rim latch so the Briton 370PM fixing kit (sold separately) may also be required to correctly install the bolt component.
- The Briton 1438 is intended for emergency exit situations in low-traffic staff-only areas, such as offices or staff corridors, where fewer than 60 trained users are present.
The 370PLM kit allows these components to be installed correctly on metal doors, maintaining their compliance. These Briton emergency exit hardware solutions are tested to EN 1125 or EN 179, and this kit supports continued adherence to those standards.
For guidance on the right exit device for your door, contact our technical team for tailored advice.
Engineered for Compliance on Escape Routes
Installing Briton panic exit hardware on a metal door without the correct fixing pack can lead to performance failures or even non-compliance. The 370PLM provides the right components to avoid that risk for the Briton 378, 377 and 1438 devices.
Always follow the manufacturer’s installation instructions.
Fit the Right Kit First Time
The Briton 370PLM exit latch fixing kit for metal doors is the only recommended solution when installing the Briton 378, 377, or 1438 onto steel or aluminium doors. If you’re fitting these models of Briton panic hardware to a metal door, this is the fixing kit you need.
We can also supply other Briton fixing kits as special orders to support a wide variety of installation requirements. If you're working with a non standard setup, we’ll help you source the right solution.
Briton also offer a wide selection of door closers designed for commercial and public environments. If you're unsure which fixing kits or accessories are required for your Briton emergency exit hardware installation, our technical team is on hand to help.
