Intumescent Letterbox Assemblies
Code: ITLP270SA
Intumescent Letterbox Assemblies with a 30 minute fire rating - available in a variety of finishes.
Read More
Fire door intumescent protection is extremely important to ensure full compliance with fire door regulations. Just because a product such as a mortice lockcase has been given a certain fire rating, if it is not used with appropriate fire door intumescent materials, then it may not be fully compliant and the overall fire rating of the door can be compromised. At Door Controls Direct, safety is extremely important and we would always advise our customers to ensure that the appropriate fire door ironmongery protection is used.
Our selection of fire door intumescent protection products includes cold smoke and plain intumescent seals. They come in a variety of finishes, styles and lengths and are suitable for both FD30S half hour and FD60S hour rated fire control doors. We also supply professional standard intumescent protection for lock cases, digital locks, hinges and other door closing devices, as well as intumescent vents and letterboxes.
Most intumescent products contain graphite which expands when exposed to heat to fill any gaps between the door and the product for the set time of the expected fire rating. This expansion helps to stop and control the spread of smoke and fire through the door and can help you to successfully compartmentalise your building. You must also ensure that the door to which you are intending to use fire rated products is fit for purpose. If you’d like to know more about this, our fire door safety checklist is a good place to start.
So whether you are refurbishing your door or fitting from new, make sure to check the fire rating of the doors and fit the appropriate fire door intumescent seals and protection for both door and other ironmongery hardware products. If you have any questions about these or any other products, please give our team a call on 01305 263300 or contact us for more information.
Categories
Price
Brand
Code: ITLP270SA
Intumescent Letterbox Assemblies with a 30 minute fire rating - available in a variety of finishes.
Code: ESAL900-IK
An intumescent pack for use with the AL900 Fire Rated Electric Strike.
Code: LBFB-IK30
Select the correct intumescent kit for the FB1 and FB2 fire brigade locks - either half hour FD30 rated or FD60 hour rated.
Code: VB1091SCA
A 250mm x 140mm or 340mm x 340mm, Silver Louvre Vent Face Plate to suit an Intumescent Grille.
Code: ITD60M1
This is an intumescent lock jacket to suit DIN standard lockcases, made of 1mm mono ammonium phosphate. Select 60mm or 80mm backset.
Lockcases are supplied separately.
Code: ITV225
An intumescent air transfer grille available in two different sizes. Choose from either 225x112mm or 300x300mm.
Code: BC4118-IK
Intumescent for use with the ZOO ZAB30 fire rated security door viewer.
Code: IB99/920
This Raven RP99Si automatic drop down door bottom seal is available in a range of sizes and can be face fixed, semi-mortice, or fully morticed.
Code: DLB5000-IK
This Borg Locks intumescent fire kit is for use with locks from their BL5000 and BL7000 range, on FD30 and FD60 fire doors.
Code: DLB2000-IK
This Borg Locks intumescent fire kit is for use with locks from their BL2500 and BL2700 range, on FD30 and FD60 fire doors.
Code: ES8000-IK30
A selection of Intumescent Kits to suit the Trimec ES8100 12/24V DC V-Lock electric bolt mortice lock. Select the correct kit for either an FD30 or FD60 fire rated doors.
Code: ZGZ200459
A GEZE double action fire pack to suit both the top centre and bottom door stop.
Code: ITPC110
A range of Intumescent Pipe Collars, intended to be retro-fitted to trunking and plastic piping, where it passes through fire resistant walls or floors. Choose from the three available sizes: 55mm, 82mm and 110mm.
Code: ML350-IK
This 1mm intumescent lock kit is for use with the GEM ML350 electric lock when installed on FD60 rated fire doors.
Code: ZGZ133465
A GEZE Single Action Fire Pack for Top Centre and Bottom Straps for use with the GEZE TS5 range of floor springs.
Code: ITLPFSNP
The Rutland FRONTIER TS008 letter plate is Kitemarked and Secured by Design for advanced security.
Use the drop down menu to select from a choice of four finishes.
Code: DCITSIP
This intumescent kit consists of 6no parts and is fire tested to BS EN 1634 with the ITS.11204 concealed door closer.
Code: IT10VW2
This intumescent fire and smoke seal features a double fin design and is 2.1m in length. Certifire Approved and tested to BS 476 part 22 and part 31.1.
Use the drop down menus to select from a choice of widths and finishes.
This intumescent strip is priced as single lengths and sold in packs of 25.