Geofire Floor Bracket White
Code: DHEMFB
The Geofire Floor Bracket allows for floor mounting of the Geofire electromagnetic door retainers.
Read More
We offer a selection of door closers from leading manufacturers such as Geze, Dorma, Briton and Arrow. Door closers are available to suit all budgets and situations including both manual and automatic doors as well as electromagnetic hold open and swing free applications. The range is complemented with concealed door closers from Geze and Perko for use in situations where a clean, aesthetically pleasing finish to the door is required.
Approved Doc M and BS8300: Relates to accessibility and the code of practice in the design of buildings to meet the needs of disabled people. Swing Free Door closers with adjustable power sizes can help with ease of access throughout a building and will often be specified on new building projects.
Part B: To do with Fire Safety – electromagnetic door closers and holders are Part B compliant. See our blog for more information on this.
We try to ensure that choosing the right door closer for you is as easy as possible and simplify technical terminology so that you know what you’re purchasing. If you are in any doubt and would like assistance with your choice, please contact the sales team on 01305 263300 or email them at [email protected]
Backcheck – Is the cushioning effect you feel when the door is swung open and is prevented from slamming into the wall behind it. It’s a useful feature to ensure that door hardware and the door itself are given a certain level of protection from misuse. Closers with backcheck are also referred to as soft door closers.
Delayed Action/Delayed Close – In simple terms, this means the length of time it takes for the door to close after being opened. It’s often a desirable feature for Care Homes or areas where it may take people a little more time to get through the door unharmed. This function could also be referred to as a door soft closer.
Power Size – This is either fixed at a set number or variable (adjustable). The power size required is determined by the door weight and width. (See Power Size Table below).
Closing Speed – This is the adjustment for the general speed of the door closing. Installers often make the mistake of adjusting this to close the door when first installing a closer, the Power Size should always be adjusted first.
Latching Action – This is adjustable and refers to the final few degrees of closing. This is beneficial to overcome any issues with the latch or seal on a door.
Mechanical Hold Open – A Hold Open Arm can be used on door closers to achieve a rigid hold open function, however these must never be used on Fire Doors.
Hold Open – Electromagnetic Hold Open: Ideal for use on Fire Doors; the Hold Open function means that the door is held open permanently at a fixed angle (unless released by the fire alarm activation). Usually this function is provided in the cam being used, the arm itself or a mechanism inside the slide channel.
Electromagnetic Free Swing – This function means that the door with the electromagnetic closer will act like a door that doesn’t have any closer on it. It means that the door will stay open at whatever angle it is left at but will close in the event of a fire. It’s a particularly good feature to use on Care Home Bedroom Doors when Hold Open function would cause privacy issues and it meets the barrier-free needs of less-abled users.
EN Power Size |
Max. Door Weight (kg) |
Max. Door Width (mm) |
1 |
20 |
750 |
2 |
40 |
850 |
3 |
60 |
950 |
4 |
80 |
1100 |
5 |
100 |
1250 |
6 |
120 |
1400 |
7 |
160 |
1600 |
The above guide is just a guide, based on optimal testing conditions and does not take into consideration any site variables such as the following:
As well as the above, when making a decision on what type of door closer you require, it is a good idea to think about the following:
Arms and Mechanisms:
See Overhead Door Closers for more information.
There are several types of Door Closers available:
More specific information can be found within the subcategories on this website.
Categories
Brand
Price
Code: DHEMFB
The Geofire Floor Bracket allows for floor mounting of the Geofire electromagnetic door retainers.
Code: ZGZ125146
The GEZE 125146 Double Action Pivot Set is for use on timber doors and can be used in conjunction with the GEZE Boxer door closers. Select from fire rated or non-fire rated options.
Code: DCD75V
The DORMA BTS75V Floor Spring Mechanism Only is a size EN1-4 Floorspring with backcheck. It is CE Marked, available in single or double action and is not handed.
Code: DCD93GNHO
This DORMA G-N Mechanical Hold Open Unit 18570000 is for use with the TS91, TS92 and TS93 Overhead Door Closers.
Code: TS5000
The GEZE TS5000 EN 2 - 6 Slide Arm Door Closer is a very heavy duty, surface mounted rack and pinion door closer with guide rail which is approved for use single action and for use on smoke and fire door. The closing force is a variable Power Size EN 2-6 and comes with adjustable closing speed, latching action and back check.
Code: DCD93GNCLS
The DORMA G-N 35800093 Limiting Stay helps minimise damage from doors that are opened normally, against adjacent walls.
Code: DCH6800SE
The ARRONE AR6800 is a template adjustable, universal, power size EN2-4, overhead door closer - ideal for retrofitting.
Code: DCAX8800-02
The Axim TC-8800-02 door bottom pivot is for use with the TC8802 transom concealed door closer. This height adjustable pivot is for installation on aluminium doors.
Code: TS3000VE
The GEZE TS3000VE EN 1-4 Electromagnetic Hold Open Slide Arm Door Closer is a surface mounted overhead door closer with a guide rail arm suitable for doors up to 1100mm and fire doors when connected to the fire alarm system.
Code: DCD80EMB
The DORMA BTS80EMB EN4 Electromagnetic Hold Open Floor Spring has electrohydraulic hold-open and integral pressure compensation feature for multipoint hold open between 65° and 175°. With adjustable, hydraulically controlled closing speed, adjustable latching action and backcheck.
Code: DCG550NV
The GEZE TS550NV FP EN 3 - 6 Cam Action Floor Spring is a universal floor spring and comes complete with backcheck. It offers fully adjustable spring strength, latch action and closing speed. It is ideal for very heavy doors that are in areas of high traffic.
Code: DAPDA80
A DORMA Double Action Floor Spring Accessory Pack for use with DORMA floor springs on Double Action Doors.
Code: TS5000E
The GEZE TS5000E EN 2-6 Electromagnetic Hold Open Slide Arm Door Closer is a surface mounted door closer with an electromagnetic hold open guide rail arm suitable for doors up to 1400mm. The hold open can be adjusted between 80° and 130°. The closing force, Power Size EN 2-6, closing speed, the end stop and the back check are adjustable.
Code: ZGZ007432
A GEZE Double Action Bottom Strap for double action doors.
Code: DCB2320
The Briton 2320B.T EN 2-4 cam action slide arm door closer is suitable for surface mounting on the pull side of the door and can be installed on fire rated doors.
Code: TS3000V
The GEZE TS3000V EN 1-4 Slide Arm Door Closer is a medium to heavy duty, surface mounted rack and pinion door closer with guide rail. It has a variable power size EN 1-4 and comes with adjustable closing speed & latching action. It is suitable for fire door applications.
Code: GAPDA500N
GEZE Double Action Floor Spring Accessory Pack for use on Double Action Doors with GEZE floor springs.
Code: DC8550
The DORMA 8550/1 Universal Side Load Floor Pivot is a floor pivot set (end-load installation) for use with transom door closers and top rails with a minimum 21mm channel depth and 35mm width.
Code: DHEM500A
The DORMA EM500A - 24V DC Electromagnetic Door Retainer is an electromagnetic hold open door retainer that is suitable for use with overhead door closers and floor springs.
Code: ADP4SAFE350
The BEA 4Safe Safety Sensor is for use with automatic operators for door safety.
Code: ZDM8066
The DORMA 8066 Top Centre - Complete Unit for use with DORMA Double Action Floor Springs.
Code: DCB996S
A Solenoid to suit Briton 996 24V DC operation to suit the Briton 996 series door closers.
Code: DCD93BGEMF
A DORMA G-EMF 64080001 Hold Open Electromagnetic Slide Channel Arm for use with the TS91, TS92 and TS93 Door Closers.
Code: TS91B
The DORMA TS91B EN3 Cam Action Door Closer is an easy to install slide channel door closer with a fixed power size EN3. Silver finish with a Contur design, it is both stylish and functional.
Code: DCDBODY
A DORMA TS73EMF Mechanism - replacement part.
Code: DCD80F-L
The DORMA BTS80F EN4 Non Hold Open Floor Spring is a universal floorspring and comes complete with backcheck. Available as single action or double action, it offers fully adjustable closing speed. It is CE Marked and Certifire Approved CF 127.
Code: IR996FL
Replacement Armoured Loop To Suit Briton 996 - 330mm flexible cable loop.
Code: TS3000ECBC
The GEZE TS3000ECBC EN 2-3 Slide Arm Door Closer is a surface mounted rack & pinion, high efficiency overhead door closer with guide rail. It is approved for use with single-action and for use on smoke and fire doors. The closing force to EN1154 size EN 2-3 variable, closing speed, latching action & back check are adjustable.
Code: DC8552
The DORMA 8552/3 Universal End Load Floor Pivot is a floor pivot set (side-load installation) for use with the RTS85 and top rails with a channel depth of 18-20mm.
Code: DCDCL
A Replacement DORMA Distributor Box and Cable for use with DORMA Electromagnetic Door Closers.
Code: DCG500N
The GEZE TS500N EN 3 Cam Action Floor Spring is a universal floor spring and comes complete with backcheck. It is non-hold open and available as single action or double action (accessories sold separately). It offers adjustable closing speed and is suitable for 30 minute fire door applications when used with intumescent. This product is the mechanism only.
Code: DCD99SF
The DORMA TS99FL Electromagnetic Swing Free Door Closer is a guide rail electromagnetic hold-open device with a free-swing function, available in frame or standard fix mounting options.
Code: TS93EB
The DORMA TS93EMF Electromagnetic Hold Open Guide Rail Door Closer is a surface mounted cam action door closer with electromagnetic guide rail arm and hold open operation.
Code: BX24ES
The GEZE Boxer EN 2-4 Concealed Electromagnetic Hold Open Door Closer is an integrated concealed door closer complete with electromagnetic hold open facility. It is CE Marked and Certifire Approved CF 242 when used with the applicable intumescent materials (included). It comes with variable Power Size EN 2-4 and adjustable closing speed, latching action and backcheck.
Code: DHEMKC
Geofire Keeper & One Metre Chain Plate for use with Geofire Door Retainers.
Code: DCB2720
The Briton 2720BD.T.S.SES Cam Action Door Closer is an overhead door closer with slide channel that is suitable for universal door applications. It has an adjustable power size EN 2-5 and a silver finish.
Code: DCAA140A
The Assa Abloy DC140A-1 overhead door closer is power size adjustable by template. It is suitable for use on fire doors and it is perfect for narrow doors.
Code: ZDM7421
The DORMA 7421 Double Action Door Strap is suitable for use with DORMA Double Action Floor Springs.
Code: DCG4000W
The GEZE TS4000 Wetroom is a heavy duty overhead door closer; approved for use with left and right single-action doors with leaf widths up to 1400mm. It comes with backcheck and delayed action and is ideal for use in harsh environments with its anti-corrosive finish.
Code: DCABM3SESF
The ARROW BM3SE Size 3 Electromagnetic Door Closer operates at 24V DC for pull side door mounting application with a choice of either Hold Open or Swing Free functionality.
Code: DCAX8800-13
The Axim TC-8800-13 side load arm is for use with the TC-8802 transom door closer, and should be installed on anti-finger trap doors.
Code: DAPSA80
A DORMA Single Action Floor Spring Accessory Pack for use with DORMA floor springs on Single Action Doors.
Code: DCB1130BTE
The Briton 1130B.TE Electromagnetic Hold Open Door Closer is a power size EN 3-4 overhead door closer in a silver finish. It has spring power adjustable closing speed and backcheck, and is fail safe.
Code: DCG3000GE
A replacement GEZE TS3000/TS5000 Electromagnetic Guide Rail for use with the TS3000E/TS5000E.
Code: DCABDC240
The Abloy DC240 door closer is a heavy duty EN 2-6, non-handed closer with backcheck and is suitable for use on fire rated doors.
Code: DCA516SE
The Arrow 516VP is an overhead fire door closer with variable power size EN 1-6, complete with backcheck function, adjustable closing speed and latching action.
Code: ZGZ006371
A GEZE Double Action Top Centre - Type B for double action doors.