Alpro EL900 ANSI Mortice Electric Strike - 12V DC
Code: ESEL900
The Alpro EL900 ANSI Mortice Electric Strike is a 12V DC, compact electric strike complete with both long and short faceplates, for use in metal or timber door applications.
Read More
Electric door locks are an essential part of an access control system and we supply a range of valuable solutions for securing the doors in your building. When combined with proximity readers or keypads these systems result in improved control of access to your building. Door Controls Direct offers systems to suit every budget and work with you to meet your particular security requirements; including the most extensive range of locks, bolts and strikes. We partner with the leading suppliers and manufacturers, such as Adams Rite, Alpro and Assa Abloy to provide electronic security devices available in 12V or 24V in both AC and DC.
Maglocks are a very common and popular electric locking product. They are very easy to install and often surface mounted. There are a range of maglocks available with a variety of holding forces and are great for low security applications. Some, like the Adams Rite MS Maglock (ELMSMAG) offer greater security than others and these have hardened steel mandibles that clamp onto the armature plate should forced entry be attempted. All maglocks operate as “Fail Safe” units.
Electric Strikes are an alternative to a maglock. You might choose an electric strike over a maglock for aesthetic reasons, but you might also choose one if you would rather that the door was “Fail Locked/Fail Secure” when power is cut. A lot of electric strikes offer both options and it’s a simple case of moving a screw in the body of the strike to change the operation. We supply a variety of 12V DC and 24V AC/DC strikes that can be morticed or rim mounted (product dependent). Some are heavier duty than others, so it’s really important that you consider the amount of traffic that will be passing through the door.
Solenoid Bolts are a great product to use on aluminium doors where a high level of security is required. A sensor on the unit detects when the door and lock are in alignment and throws the bolt which secures the door. When power is removed, the bolt retracts and allows for safe exit through the door. The bolts can be installed either vertically or horizontally in the door frame which is generally easier to get power to than if it were installed in the door itself.
Solenoid Locks offer an even greater level of security than a solenoid bolt as the solenoid engages with the handle to control access. When enabled, the solenoid engages within the handle, allowing the handle to operate the latch and open the door.
Motor Locks function in the opposite way to a solenoid lock. The deadbolt is already engaged in the door frame but when a fob is presented to the reader or a code is entered on the door keypad; the motor in the lock retracts the deadbolt, generally providing a higher level of security.
Electromagnetic shear locks are similar to maglocks but are generally higher security as they have a physical locking element to them as well. There are integral contact sensors within the lock and armature plate and when these are about 3mm from each other, they pull together and create a “shear” locking force. They are ideal for use on double swing doors.
A pin in the centre of the lock prevents any slide movement and there is also an “Anti-Residual Button” located on the armature plate.
Active filters
Code: ESEL900
The Alpro EL900 ANSI Mortice Electric Strike is a 12V DC, compact electric strike complete with both long and short faceplates, for use in metal or timber door applications.
Code: ESAL900FR
The AL900 electric strike is 12/24V AC/DC selectable, fail safe/ fail secure reversible and fire rated for use on FD30 and FD60 doors.
The fire rated option comes supplied complete with the 1mm intumescent kit.
Code: ES110
The Trimec ES110 electric release is fail safe/fail secure reversible and is 12V DC/24V DC dual voltage. It comes with a stainless steel striker for additonal strength and durability and is supplied with long and short faceplates.IP56 rated for use in exposed areas.
Code: ES8000
The Trimec ES8100 12/24v DC V-Lock electric lock is a high torque mortised bolt that moves into a V shaped strike plate which pulls the door into alignment with the lock. Fire rated versions are supplied with an intumescent kit to suit either FD30 or FD60 rated fire doors.
The ES8100 has superseded the Trimec ES8000 model.
Code: ESAL110S
The Alpro AL110 ANSI High Security Mortice Electric Strike is an ANSI style electric strike complete with a stainless steel short or long face plate for use in metal or timber door applications. This AL110 electric strike is 12/24v selectable, weather resistant and has a holding force of 1,750kg (3,860lbs). It is reversible fail-safe and fail-secure.
Code: ESVI706
The Vians VI-706 narrow adjustable electric strike is suitable for installation on timber, UPVC, and metal doors, and due to its design, it allows the lock bolt to adjust between the door and frame.