ABLOY EL561 Solenoid Lock 12/24V DC - 65mm Backset
Code: EL561
The Abloy EL561 Solenoid Lock 12/24V DC is suitable for use on wooden or metal doors and has a 65mm backset. Fire rated and non-fire rated versions available.
Read More
Electric door locks are an essential part of an access control system and we supply a range of valuable solutions for securing the doors in your building. When combined with proximity readers or keypads these systems result in improved control of access to your building. Door Controls Direct offers systems to suit every budget and work with you to meet your particular security requirements; including the most extensive range of locks, bolts and strikes. We partner with the leading suppliers and manufacturers, such as Adams Rite, Alpro and Assa Abloy to provide electronic security devices available in 12V or 24V in both AC and DC.
Maglocks are a very common and popular electric locking product. They are very easy to install and often surface mounted. There are a range of maglocks available with a variety of holding forces and are great for low security applications. Some, like the Adams Rite MS Maglock (ELMSMAG) offer greater security than others and these have hardened steel mandibles that clamp onto the armature plate should forced entry be attempted. All maglocks operate as “Fail Safe” units.
Electric Strikes are an alternative to a maglock. You might choose an electric strike over a maglock for aesthetic reasons, but you might also choose one if you would rather that the door was “Fail Locked/Fail Secure” when power is cut. A lot of electric strikes offer both options and it’s a simple case of moving a screw in the body of the strike to change the operation. We supply a variety of 12V DC and 24V AC/DC strikes that can be morticed or rim mounted (product dependent). Some are heavier duty than others, so it’s really important that you consider the amount of traffic that will be passing through the door.
Solenoid Bolts are a great product to use on aluminium doors where a high level of security is required. A sensor on the unit detects when the door and lock are in alignment and throws the bolt which secures the door. When power is removed, the bolt retracts and allows for safe exit through the door. The bolts can be installed either vertically or horizontally in the door frame which is generally easier to get power to than if it were installed in the door itself.
Solenoid Locks offer an even greater level of security than a solenoid bolt as the solenoid engages with the handle to control access. When enabled, the solenoid engages within the handle, allowing the handle to operate the latch and open the door.
Motor Locks function in the opposite way to a solenoid lock. The deadbolt is already engaged in the door frame but when a fob is presented to the reader or a code is entered on the door keypad; the motor in the lock retracts the deadbolt, generally providing a higher level of security.
Electromagnetic shear locks are similar to maglocks but are generally higher security as they have a physical locking element to them as well. There are integral contact sensors within the lock and armature plate and when these are about 3mm from each other, they pull together and create a “shear” locking force. They are ideal for use on double swing doors.
A pin in the centre of the lock prevents any slide movement and there is also an “Anti-Residual Button” located on the armature plate.
Active filters
Code: EL561
The Abloy EL561 Solenoid Lock 12/24V DC is suitable for use on wooden or metal doors and has a 65mm backset. Fire rated and non-fire rated versions available.
Code: SH2600
Surface Housing for the MSL2600 1200kg Shear Lock.
Code: EL351U12
The Abloy effeff 351U80 Electric Lock 12V & 24V DC for single or double action doors, including escape doors; enables remote locking and unlocking. It is fail unlocked and the distance between the strike and the striking plate is adjustable. It is monitored through a depressable snib.
Code: DHM600
The DHM600 is an RGL door handle magnetic lock with a 280kg holding force and built in surge protection. This kit is supplied with a maglock, door handle, armature and fixing kit and should be installed at the centre of the door leaf to prevent distortion. Choose from single or double.
Code: MLARM600
Replacement armature plate for the ML600 and ML600D maglocks from RGL.
Code: ES9000
The Trimec ES9000 is a fail secure/fail safe selectable 12/24V DC electric door release.
Code: ML600L-MB
The architectural L bracket in matt black is an aesthetically pleasing solution for installing the ML600 range of maglocks on outward opening doors.
Code: ES200
The TRIMEC ES200 series electric release features reversible fail safe/fail secure functionality and operates on either 12V or 24V DC. It is perfect for high traffic areas, providing high security and reliability for door security.
Code: EL520
The Abloy EL520 Push & Pull Function Motor Lock Case Electric Lock is complete with deadbolt and anti-friction bolt. It is fail locked outside but allows free egress from inside when a handle is fitted. This product is non-handed and ideal for public use.