Exidor 322EC Lever Operated Outside Access Device with Cylinder
The Exidor 322EC is a lever operated outside access device (OAD), suitable for use with the Exidor 200 and 300 series panic emergency exit bolts and latches.
Read moreExidor 322 Outside Access Device with Lever and Euro Cylinder
The Exidor 322EC is a lever operated outside access device (OAD) that is supplied with 3 keys and a 45mm Euro profile; which you can take out and substitute for your own master keyed cylinder.
The 322EC is non-handed and fire rated for use on timber and steel doors and is suitable for doors up to 55mm thick.
How it works:
When locked, the lever is secured in a horizontal position and the shear screw will break under excessive force to prevent unauthorised access and maintain security. When unlocked; the lever, spindle and mechanism all engage to allow the shoots and latches to be withdrawn on the inside, from the outside. The lever will remain engaged until the mechanism is locked again.
Key Product Features:
- Lever handle
- Compatible with the Exidor 200 and 300 panic hardware series
- Retracts the internal bolts/latches
- Includes a 45mm single euro cylinder with 3 keys
- Tested to EN 1125 and EN 179
- Lever dimensions help to meet the requirements of BS 8300 for inclusive design
- Bolt through fixings for steel or timber doors up to 55mm thick*
- Suitable for timber and metal doors
- CE marked
- UKCA marked
- Tested to EN 1634-1
*Please note that longer spindles and screws are available upon request for door thicknesses between 55mm and 70mm, however, these would be special order items. Please contact the office should you require these.
Exidor 322 OAD Compatibility
This Exidor outside access device is suitable for use with the following panic bars and push pads from the Exidor 200 series:
- 296
- 294
- 294A
- 285
- 284
- 297
- 293
- 293A
Exidor also the 302EC with knob operation, however it does not meet the requirements for BS 8300.
