
The Exidor 302EC is a knob operated outside exit device, suitable for use with the Exidor 200 and 300 series panic bolts and latches.
Read moreExidor 302 Knob Outside Access Device
The Exidor 302EC is a knob operated OAD that is supplied with 3 keys and a 40mm Euro profile cylinder; which you can take out and substitute for your own master keyed cylinder.
How it works:
When locked, the mechanism is disengaged which allows the knob to turn freely. When unlocked, the knob, spindle and mechanism are engaged, which allows the shoots or latches of the panic bolts or latches to be withdrawn from the outside. The knob will remain engaged until the door is relocked again. This product is designed so that in the event of an emergency, the door can be opened from the inside, even if the knob is locked on the outside.
Key Product Features:
- Knob handle
- Non handed
- Compatible with the Exidor 200 and 300 panic hardware series
- Retracts the internal bolts/latches
- Includes a 40mm single euro cylinder with 3 keys
- Tested to EN 1125 and EN 179
- Bolt through fixings for steel or timber doors up to 45mm thick*
- CE marked
- UKCA marked
- Tested to EN 1634-1
*Please note that longer spindles and screws are available upon request for door thicknesses over 45mm but these would be special order items. Please contact the office should you require this.
Exidor 302 OAD Compatibility
The 302EC Exidor outside access device is suitable for use with the bolts and latches from the Exidor 200 and 300 series and offers external access on the door.
- 296
- 294
- 294A
- 285
- 284
- 297
- 293
- 293A
The Exidor 322 with lever handle is available and meets the dimensional requirements of BS 8300 for accessible design.