Electromagnetic Guide Rail for GEZE TS3000/TS5000 Closers
A replacement GEZE electromagnetic guide rail for use with the TS3000E and TS5000E hold open door closers.
Read moreElectromagnetic Guide Rail for GEZE TS3000E/TS5000E Closers
The GEZE electromagnetic guide rail is for use with the TS3000E and TS5000E electromagnetic hold open door closers.
Key Product Features:
- Silver finish
- Non-handed
- For hinge side installation
- Suitable for single action doors
- Electromagnetic hold open function
- Adjustable retention force
- Operating voltage: 24V DC
- Complete with screwed side block
- Height compensation +/- 2mm
- Residual ripple: 20%
- Successfully third party tested to BS EN 1155
- MPN: 116295
- Dimensions: 498.5mm x 40mm x 30mm
GEZE E Guide Rail Specification
This replacement E guide rail is suitable for use on fire and smoke protection doors. It can be used where the closer is installed on the pull side of the door, in Figure 1 configuration.
The minimal hold open point is 80°. The angle can be adjusted between 80° and 130°. At 90°, the extension torque for the door should be 40-120 Nm.
Once the channel and arm assembly have been replaced, make sure to test the hold open function. Ongoing testing should be carried out as part of your regular fire door maintenance regime.
If a replacement hold open guide rail is required for opposite hinge side fitting, it is available as a special order. Contact our team today to place an order.
