Double Slot Shelving Brackets
Code: RB1031WE
This range of Double Slot Shelving Brackets from Hoppe are available in seven different lengths. Select the required size from the drop down menu.
Read More
A full range for all your Door Hardware and Door Furniture needs. Door Hardware encompasses all kinds of items and in this section you will find a comprehensive range of architectural ironmongery and at the best price for quality products. Door Controls Direct can supply you with all aspects of door hardware and ironmongery as well as door closers, fire exit hardware, door hinges and door lever handles.
In this section, you will find various door fixings such as door stops, hat and coat hooks, handrail brackets and surface and flush door bolts. We also supply intumescent ironmongery protection to ensure compliance with fire ratings. If you are looking for kickplates, hinges, pull handles you will find them here. We supply products from top quality and well-established brands, so you can purchase from us with confidence.
Perhaps you are looking for ironmongery that can help you to comply with Building Regulations BS 8300 and Approved Document M? This regulation applies to all commercial buildings and cover the following (but not limited to) areas:
1) Access routes to and around buildings
2) Entering a building
3) Horizontal circulation
4) Surfaces and communication aids
5) Individual rooms
6) Vertical circulation
Need door hardware for a commercial or public building? We supply compliant solutions for office buildings, public environments such as schools, hospitals, and other public sector buildings. It is increasingly important to include both fire-exit hardware and finger protection and Door Controls Direct can guide you and supply you. We also have a selection of products that can assist with door safety and door security.
So, whether it is something decorative, practical, or essential, be sure to shop with us today. We have just the thing to help you complete your projects and refurbishments, and the knowledgable staff to help you make the right decision for your facility.
Active filters
Code: RB1031WE
This range of Double Slot Shelving Brackets from Hoppe are available in seven different lengths. Select the required size from the drop down menu.
Code: DC1002SS
A Stainless Steel Floor Mounted Oval Shielded Door Stop - unobtrusive and practical to protect doors and walls.
Code: IB3719WE
The Little Fingers heavy duty hinge jamb finger guard is available to suit either the front or rear side of hinged and pivot doors, whether left hand or right hand opening.
Code: DORGARDB
The Dorgard fire door retainer is a BS EN 1155 compliant, wire-free solution for legally holding open fire doors that you can install in under 5 minutes.
Select from black or white finish housing (floor fixing foot not included).
Code: RB1012WE
This range of Double Slot Shelving Uprights from Hoppe are available in six different lengths. Select the required size from the drop down menu.
Code: DC1664CP
A cylinder pattern Projection Door Stop, available in a polished chrome, polished brass or satin chrome finish, with a black buffer. Choose from 64mm or 80mm depending on the projection of the door handle being used.
Code: DC1184SS
The ZOO ZAS84 Stainless Steel Heavy Duty Floor Mounted Door Stop is a large, heavy duty, commercial floor mounted doorstop with a black rubber buffer.
Code: DC1191SS
The ZOO ZAS91 Stainless Steel Heavy Duty Anchored Door Stop is a large, heavy duty, floor mounted, stainless steel doorstop with ground anchor.
Code: IB3721WE
The Lorient LAS9070 si Hinge Cavity Side Finger Guard and LAS9050 si Hinge Knuckle Side Finger Guard are for installation to the front, rear or both (kit), regardless of whether the door is left or right hand opening, for door safety.
Code: IB3710WE
The Little Fingers Slimline finger guard is available as a separate front finger guard and rear guard, but also as a combined kit to fit over both door gaps.
Code: DC1012SS
A Satin or Polished Stainless Steel Floor Mounted Door Stop with a 30mm diameter round flat top – 40mm in height.
Code: DC3006SA
These Strand D6095/D7095 Friction Limiting Door Stays limit the opening angle of a door. Select from the surface mounted D7095 or the mortice D6095 models.
Code: IB3822SA
The Raven RP62 Finger Guard is for installation to the front, hinge cavity side of a hinged door, whether left or right hand opening.
Code: DC1187SS
The ZOO ZAS87 Stainless Steel Sloped Floor Mounted Door Stop is a tapered design, 47mm diameter, floor mounted door stop with a black rubber buffer.
Code: DC1188SS
The ZOO ZAS88 Stainless Steel Round Collared Floor Mounted Door Stop is a domed top design, floor mounted doorstop with a black rubber collar surround.
Code: DC1189SS
The ZOO ZAS89 Stainless Steel Cone Shaped Floor Mounted Door Stop is a cone design, floor mounted doorstop with a black rubber buffer.
Code: IBFP200
The Strand FP200 roller blind finger guard is for installation to the front, hinge cavity side of a hinged door, whether left or right hand opening.
Code: DC3031SC
A satin chrome finish Foot Operated Door Holder.
Code: DC1670SS
A black, satin or polished stainless steel projection door stop with a 70mm overall projection and 3 screw fixing points.
Code: HB3012SS
The Royde & Tucker H131-105 Emergency Release Toilet Door Stop allows a normally inward opening door to open outwards, when the door is hung on pivots. Simply depress the pivot and pull the door outwards.
Code: DLA4591
The ADAMS RITE 4591 Deadlatch Paddle Handle is an alternative to using a knob or lever handle on a latched door. It can be configured to suit push or pull and left or right handed doors. The ADAMS RITE 4591 is compatible with the ADAMS RITE 4300, 4500 and 4900 Series Deadlatches, MS+1890 Deadlock/Deadlatch and the 2190/2290 Deadbolt/Deadlatch.
Code: DSA
An aluminium door selector, suitable for both timber and metal doors up to 1000mm wide.
Code: DC1003CP
An Oval Shielded Door Stop in either a polished brass finish or polished chrome finish.
Code: DC1186SS
The ZOO ZAS86 Large Round Floor Mounted Door Stop is a large, 40mm diameter floor mounted doorstop with black rubber buffer in a satin stainless steel finish
Code: DORSMARTB
The Dorgard SmartSound Fire Door Retainer is a wire-free solution for legally holding open fire doors. Select either a black or white finish.
Code: DC1002BK
An oval shaped black doorstop with black rubber buffer. Suitable for floor mounting.