Graphite Intumescent Hinge Pads - Self-Adhesive
Code: XB8452XX/SA
These 1mm self adhesive graphite intumescent hinge pads are for installation with 100mm/4" fire door hinges.
2no pads are required per hinge.
Read More
This section of the website is designed to provide you with peace of mind in selecting the right product for your fire door. These fire door essentials are all CE marked and fully compliant for use on fire doors. Choose from fire rated door closers, fire rated locks and latches, fire rated lever handles, appropriate fire door signage and intumescent to ensure your fire door’s integrity and rating is maintained.
Active filters
Code: XB8452XX/SA
These 1mm self adhesive graphite intumescent hinge pads are for installation with 100mm/4" fire door hinges.
2no pads are required per hinge.
Code: XB8451XX
These Intumescent Hinge Pads are made from black graphite and suit 100mm/4" hinges.
Sold as either:
A pack of 6 plates to suit 3no hinges
or
Single units, where 2 intumescent hinge plates would be required to install with 1no hinge.
Code: XB8471XX
A universal intumescent kit to suit tubular mortice latches (Latch not included).
Code: DORGARDB
The Dorgard fire door retainer is a BS EN 1155 compliant, wire-free solution for legally holding open fire doors that you can install in under 5 minutes.
Select from black or white finish housing (floor fixing foot not included).
Code: XB8440XX/SA
These 1mm self adhesive Interdens intumescent hinge pads are for use with 100mm / 4" fire door hinges. 2no pads are required per hinge.
Code: XB8466XX
Intumescent Flush Bolt Kit for use with lever action flush bolts.
Code: XB8465XX
This is an intumescent lock jacket to suit DIN standard mortice locks, made of black graphite. Select 60mm or 80mm backset.
Code: XB8490XX
These 1mm Interdens intumescent hinge pads are for use with the Royde and Tucker H102 and H208 hi-load hinges. 2no pads are required per hinge.
Code: XB8467XX
A selection of Intumescent Kits to suit various British Standard sashlocks and deadlocks. (Lockcase not included).
Code: XB8478XX
The Abloy INPK-DIN-65 intumescent lock jacket is designed for use with the EL560 solenoid lock when installed on FD60 rated timber fire doors.
Code: XB8479XX
This intumescent kit for the Abloy EA280 concealed door loop should be installed on timber fire doors to achieve an FD30 or FD60 fire rating.
Code: DORSMARTB
The Dorgard SmartSound Fire Door Retainer is a wire-free solution for legally holding open fire doors. Select either a black or white finish.
Code: DCTS3204SE
The Rutland TS.3204 overhead door closer has a slim cover that is available in six finishes. Choose from the drop down menu below.
Code: DCTS9205SE
The Rutalnd TS.9205 door closer with backcheck and delayed action has an adjustable power size EN2-5 and is Certfire approved. It is available in 16 finishes.
Code: DCTS3204FBSE
The TS.3204 Rutland door closer has a template adjustable power size EN 3/4 and suits doors up to 80kg. It's CE marked for use on fire rated doors.
Code: DCTS4204SE
The Rutland TS.4204 door closer has adjustable power size, backcheck, and delayed action. Select from one of three finishes below.
Code: DCTS5204SE
The Rutland TS.5204 door closer has adjustable power size EN 2-4, backcheck function and is Certifire Approved and CE marked for use on fire doors. Select your finish below.
Code: DCTS9205BCSE
The Rutland TS.9205 door closer with backcheck is available in a range of finishes. It is suitable for Fig. 1 and Fig. 66 installation and has an adjustable power size EN 2-5.
Code: DCTS9205BCFBSE
The Rutland TS.9205 door closer with backcheck and no cover is the perfect value engineered solution for every facility. It has an adjustable power size EN 2-5.
Code: DCTS9205FBSE
The Rutland TS.9205 door closer with delayed action is suitable for Fig. 1 pull side or Fig. 66 push side mounting and has an adjustable power size EN 2-5. It has a silver finish with no cover.