Graphite Intumescent Hinge Pads - Self-Adhesive
Code: XB8452XX/SA
These 1mm self adhesive graphite intumescent hinge pads are for installation with 100mm/4" fire door hinges.
2no pads are required per hinge.
Read More
This section of the website is designed to provide you with peace of mind in selecting the right product for your fire door. These fire door essentials are all CE marked and fully compliant for use on fire doors. Choose from fire rated door closers, fire rated locks and latches, fire rated lever handles, appropriate fire door signage and intumescent to ensure your fire door’s integrity and rating is maintained.
Active filters
Code: XB8452XX/SA
These 1mm self adhesive graphite intumescent hinge pads are for installation with 100mm/4" fire door hinges.
2no pads are required per hinge.
Code: XB7321WE
Our Intumescent Fire & Smoke Seals - 2100mm length (with brush) have been extensively tested to the latest British standards BS 476 part 22 & part 31.1. They are also Certifire Approved, no. CF846.
Sold in packs of 25no lengths. Priced as single lengths.
Code: XB7310WE
This Intumescent Fire and Smoke Seal (with brush) – 1050mm length, helps to prevent the spread of smoke and fire through the gap between the door frame and the door perimeter. When exposed to heat, the graphite expands to fill this gap, whilst the brush stops the passing of smoke.
Sold in packs of 25no lengths. Priced as single lengths.
Code: XB8451XX
These Intumescent Hinge Pads are made from black graphite and suit 100mm/4" hinges.
Sold as either:
A pack of 6 plates to suit 3no hinges
or
Single units, where 2 intumescent hinge plates would be required to install with 1no hinge.
Code: XB7021WE
This Intumescent Fire Seal - 2100mm length is an essential product to maintain the fire rating of a fire door. It prevents the spread of fire through the gap between the door edge and the door frame.
Sold in packs of 25no lengths. Priced as single lengths.
Code: XB8471XX
A universal intumescent kit to suit tubular mortice latches (Latch not included).
Code: IB2107SE
The TOP37 Rebated Drop Down Acoustic Door Seals are a rebated model for timber doors. They have been acoustically tested to achieve up to 37dB Rw.
Code: IBT726
The Trend rebated drop down seal is available in a variety of lengths. It is trimmable by up to 200mm, with a maximum drop of 14mm, and is fire tested to FD60.
Code: DORGARDB
The Dorgard fire door retainer is a BS EN 1155 compliant, wire-free solution for legally holding open fire doors that you can install in under 5 minutes.
Select from black or white finish housing (floor fixing foot not included).
Code: XB8440XX/SA
These 1mm self adhesive Interdens intumescent hinge pads are for use with 100mm / 4" fire door hinges. 2no pads are required per hinge.
Code: XB8466XX
Intumescent Flush Bolt Kit for use with lever action flush bolts.
Code: XB8465XX
This is an intumescent lock jacket to suit DIN standard mortice locks, made of black graphite. Select 60mm or 80mm backset.
Code: XB8490XX
These 1mm Interdens intumescent hinge pads are for use with the Royde and Tucker H102 and H208 hi-load hinges. 2no pads are required per hinge.
Code: IB2117SA
These Applique Surface Drop Down Acoustic Door Seals are surface mountable and acoustically tested achieving up to 37dB Rw. They are suitable for use on FD60 (60 minute) timber fire doors.
Code: XB8467XX
A selection of Intumescent Kits to suit various British Standard sashlocks and deadlocks. (Lockcase not included).
Code: IBA730
The Applic drop down seal is available in a variety of lengths. It is surface mounted, with a maximum drop of 15mm, and is fire tested to 60 minutes.
Code: XB7010WE
This Intumescent Fire Seal - 1050mm length expands when it comes into contact with fire to fill the gap between the door perimeter and the door frame. It is an essential product to maintain a fire door rating and for the safety of a building's occupants.
Sold in packs of 25no lengths. Priced as single lengths.
Code: XB8121BL
These Corner Acoustic Perimeter Seals dramatically improves the effectiveness of a doorset assembly by reducing noise, smoke and air movement between the gap between the door perimeter and the door frame. These acoustic seals are fully compliant with Approved Document E and are super easy to fit.
Code: XB8478XX
The Abloy INPK-DIN-65 intumescent lock jacket is designed for use with the EL560 solenoid lock when installed on FD60 rated timber fire doors.
Code: XB8479XX
This intumescent kit for the Abloy EA280 concealed door loop should be installed on timber fire doors to achieve an FD30 or FD60 fire rating.
Code: XB10DPW
This pack contains 5no 1050mm lengths of brush fire and smoke intumescent strips to suit a single timber fire door.
Select white or brown finish, and 10mm x 4mm, or 15mm x 4mm.
Code: DORSMARTB
The Dorgard SmartSound Fire Door Retainer is a wire-free solution for legally holding open fire doors. Select either a black or white finish.