RGL Wireless Single Channel Receiver for WL-KP35 Keypad
The RGL REC-35 is a single channel receiver designed for use with the WL-KP35 battery-powered wireless keypad. With 12V - 24V AC/DC operating voltage, it offers a simple and reliable way to control access points where installing wiring to the keypad is difficult or impractical.
This receiver for wireless keypads is ideal for use with access controlled external gates, remote doors, or doors with limited cabling routes. It delivers secure wireless signal transmission and straightforward integration with a variety of standard access control systems.
Key Product Features:
- REC-35: Receiver from RGL
- Suitable for use with the WL-KP35 wireless keypad, sold separately
- Operating voltage: 12 - 24V AC/DC
- Working temperature: -20°C to 60 °C
- Rolling Code 300pcs
- Relay Contact 1A 30VDC
- For use with the WL-KP35 keypad
Designed for Access Points with Wiring Constraints
The REC-35 single channel receiver is a practical choice ideal for:
- External gates with the keypad mounted on a post
- Remote doors located away from main facility areas
- Access points in isolated or hard to reach areas
- Retrofit installations
- Protected buildings where cabling routes are restricted
- Areas where cable runs would cross footpaths
This wireless keypad receiver allows the keypad to be positioned where it’s needed, typically near the door or gate, while the receiver remains safely installed close to the power supply.
By removing the need to run a cable to the keypad, this RGL single channel receiver can reduce installation time and complexity, particularly when integrating with an existing access control system. It allows for a neat finish, especially where aesthetics are a concern.
Testing the signal on-site before final fixing is recommended, particularly if installing the receiver in a metal PSU enclosure. Signal quality can be affected by dense building materials or steel housings.
Trusted Wireless Solution for Low Traffic Doors
The REC-35 is ideal for doors and gates that don’t experience constant footfall but still require secure, code based entry.
The paired WL-KP35 wireless keypad operates on batteries, so it’s best suited to areas where traffic is low and battery life can be monitored and maintained as part of routine checks.
Recommended Components for a Complete Access Control Setup
If you're installing a new access control system, the REC-35 wireless keypad receiver works well with a range of components to create a secure setup.
- IP-rated maglocks for external gates and exposed entry points, providing strong holding force and weather resistance
- Standalone access control kits that include essentials like power supplies and electric locking devices, just add the REC-35 and WL-KP35 keypad to tailor the setup to your needs
- Relays, including timer relays for setups where the keypad is positioned away from the door to allow enough time for users to reach and open the door before it locks
Explore our full access control and electric locking ranges or get in touch with our technical team for help choosing the right solution for your setup.
