Graphite Intumescent Hinge Pads - Self-Adhesive
Code: ITHG1/SA
These 1mm self adhesive graphite intumescent hinge pads are for installation with 100mm/4" fire door hinges.
2no pads are required per hinge.
Read More
Fire door intumescent protection is extremely important to ensure full compliance with fire door regulations. Just because a product such as a mortice lockcase has been given a certain fire rating, if it is not used with appropriate fire door intumescent materials, then it may not be fully compliant and the overall fire rating of the door can be compromised. At Door Controls Direct, safety is extremely important and we would always advise our customers to ensure that the appropriate fire door ironmongery protection is used.
Our selection of fire door intumescent protection products includes cold smoke and plain intumescent seals. They come in a variety of finishes, styles and lengths and are suitable for both FD30S half hour and FD60S hour rated fire control doors. We also supply professional standard intumescent protection for lock cases, digital locks, hinges and other door closing devices, as well as intumescent vents and letterboxes.
Most intumescent products contain graphite which expands when exposed to heat to fill any gaps between the door and the product for the set time of the expected fire rating. This expansion helps to stop and control the spread of smoke and fire through the door and can help you to successfully compartmentalise your building. You must also ensure that the door to which you are intending to use fire rated products is fit for purpose. If you’d like to know more about this, our fire door safety checklist is a good place to start.
So whether you are refurbishing your door or fitting from new, make sure to check the fire rating of the doors and fit the appropriate fire door intumescent seals and protection for both door and other ironmongery hardware products. If you have any questions about these or any other products, please give our team a call on 01305 263300 or contact us for more information.
Active filters
Code: ITHG1/SA
These 1mm self adhesive graphite intumescent hinge pads are for installation with 100mm/4" fire door hinges.
2no pads are required per hinge.
Code: IT10SW2
Our Intumescent Fire & Smoke Seals - 2100mm length (with brush) have been extensively tested to the latest British standards BS 476 part 22 & part 31.1. They are also Certifire Approved, no. CF846.
Sold in packs of 25no lengths. Priced as single lengths.
Code: IT10SW1
This Intumescent Fire and Smoke Seal (with brush) – 1050mm length, helps to prevent the spread of smoke and fire through the gap between the door frame and the door perimeter. When exposed to heat, the graphite expands to fill this gap, whilst the brush stops the passing of smoke.
Sold in packs of 25no lengths. Priced as single lengths.
Code: ITHG1(6)
These Intumescent Hinge Pads are made from black graphite and suit 100mm/4" hinges.
Sold as either:
A pack of 6 plates to suit 3no hinges
or
Single units, where 2 intumescent hinge plates would be required to install with 1no hinge.
Code: IT10PW2
This Intumescent Fire Seal - 2100mm length is an essential product to maintain the fire rating of a fire door. It prevents the spread of fire through the gap between the door edge and the door frame.
Sold in packs of 25no lengths. Priced as single lengths.
Code: ITUKGTL
A universal intumescent kit to suit tubular mortice latches (Latch not included).
Code: IB2107SE
The TOP37 Rebated Drop Down Acoustic Door Seals are a rebated model for timber doors. They have been acoustically tested to achieve up to 37dB Rw.
Code: ITHM1/SA
These 1mm self adhesive Interdens intumescent hinge pads are for use with 100mm / 4" fire door hinges. 2no pads are required per hinge.
Code: IBT726
The Trend rebated drop down seal is available in a variety of lengths. It is trimmable by up to 200mm, with a maximum drop of 14mm, and is fire tested to FD60.
Code: ITHM1-36
These 1mm Interdens intumescent hinge pads are for use with a variety of fire rated hinges 102mm high and up to 88mm wide.
These hinge pads are sold as singles and 2no pads are required per hinge.
Code: ITFB
Intumescent Flush Bolt Kit for use with lever action flush bolts.
Code: ITD60G1
This is an intumescent lock jacket to suit DIN standard mortice locks, made of black graphite. Select 60mm or 80mm backset.
Code: ITUKGD
A universal intumescent kit to suit British Standard deadlocks. (Lockcase not included).
Code: IBA730
The Applic drop down seal is available in a variety of lengths. It is surface mounted, with a maximum drop of 15mm, and is fire tested to 60 minutes.
Code: IB2117SA
These Applique Surface Drop Down Acoustic Door Seals are surface mountable and acoustically tested achieving up to 37dB Rw. They are suitable for use on FD60 (60 minute) timber fire doors.
Code: CLIK
Easy to fit Codelocks Intumescent Fire Kit to fit with Codelocks mechanical and electronic latch lock products. When fitted they can be installed on 30 or 60 minute fire doors.
Code: IT10PW1
This Intumescent Fire Seal - 1050mm length expands when it comes into contact with fire to fill the gap between the door perimeter and the door frame. It is an essential product to maintain a fire door rating and for the safety of a building's occupants.
Sold in packs of 25no lengths. Priced as single lengths.
Code: XB8121BL
These Corner Acoustic Perimeter Seals dramatically improves the effectiveness of a doorset assembly by reducing noise, smoke and air movement between the gap between the door perimeter and the door frame. These acoustic seals are fully compliant with Approved Document E and are super easy to fit.
Code: IT10SW1(5)
This pack contains 5no 1050mm lengths of brush fire and smoke intumescent strips to suit a single timber fire door.
Select white or brown finish, and 10mm x 4mm, or 15mm x 4mm.
Code: ITSHEET
A high performance intumescent graphite sheet, ideal to for cutting to size to install with ironmongery on fire rated doors, such as hinges, lockcases, latches and concealed door closers.
Code: ITLP270SA
Intumescent Letterbox Assemblies with a 30 minute fire rating - available in a variety of finishes.
Code: VB1091SCA
A 250mm x 140mm or 340mm x 340mm, Silver Louvre Vent Face Plate to suit an Intumescent Grille.
Code: ITV225
An intumescent air transfer grille available in two different sizes. Choose from either 225x112mm or 300x300mm.
Code: ES8000-IK30
A selection of Intumescent Kits to suit the Trimec ES8100 12/24V DC V-Lock electric bolt mortice lock. Select the correct kit for either an FD30 or FD60 fire rated doors.