ARROW 624EM Electromagnetic Hold Open/Swing Free Door Closer
Code: DCF97
The ARROW 624EM electromagnetic hold open/swing free door closer operates at 24V DC and has a plug in cable loop. Fixed power size EN 4. Universal fitting.
Read More
We offer a selection of door closers from leading manufacturers such as GEZE, dormakaba, Briton, and Arrow. Closers are available to suit all budgets and situations including both manual and automatic doors as well as electromagnetic hold open and swing free applications. The range is complemented with concealed door closers from Perko for use in situations where a clean, aesthetically pleasing finish to the door is required.
Approved Doc M and BS8300: Relates to accessibility and the code of practice in the design of buildings to meet the needs of disabled people. Swing free door closers with adjustable power sizes can help with ease of access throughout a building and will often be specified on new building projects.
Part B: To do with fire safety – electromagnetic door closers and holders are Part B compliant.
We try to ensure that choosing the right door closer for you is as easy as possible and simplify technical terminology so that you know what you’re purchasing. If you are in any doubt and would like assistance with your choice, please contact the sales team on 01305 263300 or email [email protected]
Backcheck – Is the cushioning effect you feel when the door is swung open and is prevented from slamming into the wall behind it. It’s a useful feature to ensure that door hardware and the door itself are given a certain level of protection from misuse. Closers with backcheck are also referred to as soft door closers.
Delayed Action/Delayed Close – In simple terms, this means the length of time it takes for the door to close after being opened. It’s often a desirable feature for Care Homes or areas where it may take people a little more time to get through the door unharmed. This function could also be referred to as a door soft closer.
Power Size – This is either fixed at a set number or variable (adjustable). The power size required is determined by the door weight and width. (See Power Size Table below).
Closing Speed – This is the adjustment for the general speed of the door closing. Installers often make the mistake of adjusting this to close the door when first installing a closer, the Power Size should always be adjusted first.
Latching Action – This is adjustable and refers to the final few degrees of closing. This is beneficial to overcome any issues with the latch or seal on a door.
Mechanical Hold Open – A Hold Open Arm can be used on door closers to achieve a rigid hold open function, however these must never be used on Fire Doors.
Hold Open – Electromagnetic Hold Open: Ideal for use on Fire Doors; the Hold Open function means that the door is held open permanently at a fixed angle (unless released by the fire alarm activation). Usually this function is provided in the cam being used, the arm itself or a mechanism inside the slide channel.
Electromagnetic Free Swing – This function means that the door with the electromagnetic closer will act like a door that doesn’t have any closer on it. It means that the door will stay open at whatever angle it is left at but will close in the event of a fire. It’s a particularly good feature to use on Care Home Bedroom Doors when hold open function would cause privacy issues and it meets the barrier-free needs of less-able users.
EN Power Size |
Max. Door Weight (kg) |
Max. Door Width (mm) |
1 |
20 |
750 |
2 |
40 |
850 |
3 |
60 |
950 |
4 |
80 |
1100 |
5 |
100 |
1250 |
6 |
120 |
1400 |
7 |
160 |
1600 |
The above guide is just a guide, based on optimal testing conditions and does not take into consideration any site variables such as the following:
As well as the above, when making a decision on what type of door closer you require, it is a good idea to think about the following:
If you want to read more, head over to our complete guide to selecting the right door closer.
Arms and Mechanisms:
See overhead door closers for more information.
There are a wide variety of door closers available, click through below to find out more:
Active filters
Code: DCF97
The ARROW 624EM electromagnetic hold open/swing free door closer operates at 24V DC and has a plug in cable loop. Fixed power size EN 4. Universal fitting.
Code: TS4000EFS
The GEZE TS4000EFS is an overhead door closer for single-action doors up to 1400mm wide. It is fire rated, features an adjustable power size and is suitable for doors up to 120kg. This door closer is energy efficient, easy to maintain, and suitable for diverse settings.
Code: DCB9961
The Briton 996 door closer has hold open or swing free function and can be used on fire doors. Select different power sizes and applications below.
Code: TS4000E
The GEZE TS4000E hold open electromagnetic door closer is a surface mounted door closer with adjustable power size. It is suitable for doors up to 120kg and up to 1400mm wide.
Code: DHEM24
The Geofire Electromagnetic door holder is designed to hold open fire doors connected to the fire alarm - available in 24V DC or 240V AC.
Code: TS73EMF
The dormakaba TS73EMF electromagnetic door closer with a power size EN 4 is Certifire Approved and suitable for Figure 1 pull side mounting. Select the hold open or swing free function using the drop down menu.
Code: DORGARDB
The Dorgard fire door retainer is a BS EN 1155 compliant, wire-free solution for legally holding open fire doors that you can install in under 5 minutes.
Select from black or white finish housing (floor fixing foot not included).
Code: DHEMFB
The Geofire Floor Bracket allows for floor mounting of the Geofire electromagnetic door retainers.
Code: DHEM800
The ARROW 800 Series Electromagnetic Door Holder operates at 24V DC. It has a 200NM Holding force and has a silver finish.
Code: TS3000VE
The GEZE TS3000VE is an electromagnetic door closer with the hold open function. It features a slide arm and has an adjustable power size EN 1-4. Certifire Approved for fire rated doors.
Code: DCD80EMB
The DORMA BTS80EMB EN4 Electromagnetic Hold Open Floor Spring has electrohydraulic hold-open and integral pressure compensation feature for multipoint hold open between 65° and 175°. With adjustable, hydraulically controlled closing speed, adjustable latching action and backcheck.