Graphite Intumescent Hinge Pads - Self-Adhesive
Code: ITHG1/SA
These 1mm self adhesive graphite intumescent hinge pads are for installation with 100mm/4" fire door hinges.
2no pads are required per hinge.
Read More
This section of the website is designed to provide you with peace of mind in selecting the right product for your fire door. These fire door essentials are all CE marked and fully compliant for use on fire doors. Choose from fire rated door closers, fire rated locks and latches, fire rated lever handles, appropriate fire door signage and intumescent to ensure your fire door’s integrity and rating is maintained.
Active filters
Code: ITHG1/SA
These 1mm self adhesive graphite intumescent hinge pads are for installation with 100mm/4" fire door hinges.
2no pads are required per hinge.
Code: ITHG1(6)
These Intumescent Hinge Pads are made from black graphite and suit 100mm/4" hinges.
Sold as either:
A pack of 6 plates to suit 3no hinges
or
Single units, where 2 intumescent hinge plates would be required to install with 1no hinge.
Code: TS73EMF
The dormakaba TS73EMF electromagnetic door closer with a power size EN 4 is Certifire Approved and suitable for Figure 1 pull side mounting. Select the hold open or swing free function using the drop down menu.
Code: ITUKGTL
A universal intumescent kit to suit tubular mortice latches (Latch not included).
Code: ITHM1/SA
These 1mm self adhesive Interdens intumescent hinge pads are for use with 100mm / 4" fire door hinges. 2no pads are required per hinge.
Code: DCD68
The dormakaba TS68 is a rack and pinion overhead door closer with universal installation options. It is tested to BS EN 1154 and Certifire Approved for use on timber fire rated doors rated up to 120 minutes.
Code: ITHM1-36
These 1mm Interdens intumescent hinge pads are for use with a variety of fire rated hinges 102mm high and up to 88mm wide.
These hinge pads are sold as singles and 2no pads are required per hinge.
Code: ITFB
Intumescent Flush Bolt Kit for use with lever action flush bolts.
Code: ITD60G1
This is an intumescent lock jacket to suit DIN standard mortice locks, made of black graphite. Select 60mm or 80mm backset.
Code: IB99/920
This Raven RP99Si automatic drop down door bottom seal is available in a range of sizes and can be face fixed, semi-mortice, or fully morticed.