Graphite Intumescent Hinge Pads - Self-Adhesive
Code: ITHG1/SA
These 1mm self adhesive graphite intumescent hinge pads are for installation with 100mm/4" fire door hinges.
2no pads are required per hinge.
Read More
This section of the website is designed to provide you with peace of mind in selecting the right product for your fire door. These fire door essentials are all CE marked and fully compliant for use on fire doors. Choose from fire rated door closers, fire rated locks and latches, fire rated lever handles, appropriate fire door signage and intumescent to ensure your fire door’s integrity and rating is maintained.
Active filters
Code: ITHG1/SA
These 1mm self adhesive graphite intumescent hinge pads are for installation with 100mm/4" fire door hinges.
2no pads are required per hinge.
Code: IT10SW2
Our Intumescent Fire & Smoke Seals - 2100mm length (with brush) have been extensively tested to the latest British standards BS 476 part 22 & part 31.1. They are also Certifire Approved, no. CF846.
Sold in packs of 25no lengths. Priced as single lengths.
Code: IT10SW1
This Intumescent Fire and Smoke Seal (with brush) – 1050mm length, helps to prevent the spread of smoke and fire through the gap between the door frame and the door perimeter. When exposed to heat, the graphite expands to fill this gap, whilst the brush stops the passing of smoke.
Sold in packs of 25no lengths. Priced as single lengths.
Code: ITHG1(6)
These Intumescent Hinge Pads are made from black graphite and suit 100mm/4" hinges.
Sold as either:
A pack of 6 plates to suit 3no hinges
or
Single units, where 2 intumescent hinge plates would be required to install with 1no hinge.
Code: IT10PW2
This Intumescent Fire Seal - 2100mm length is an essential product to maintain the fire rating of a fire door. It prevents the spread of fire through the gap between the door edge and the door frame.
Sold in packs of 25no lengths. Priced as single lengths.
Code: ITUKGTL
A universal intumescent kit to suit tubular mortice latches (Latch not included).
Code: BB7008SS
This fire rated stainless steel lever action flush bolt is available with radius or square faceplates and in a variety of sizes. Select from the drop down menus below.
Code: IB2107SE
The TOP37 Rebated Drop Down Acoustic Door Seals are a rebated model for timber doors. They have been acoustically tested to achieve up to 37dB Rw.
Code: ITHM1/SA
These 1mm self adhesive Interdens intumescent hinge pads are for use with 100mm / 4" fire door hinges. 2no pads are required per hinge.
Code: IBT726
The Trend rebated drop down seal is available in a variety of lengths. It is trimmable by up to 200mm, with a maximum drop of 14mm, and is fire tested to FD60.
Code: ITHM1-36
These 1mm Interdens intumescent hinge pads are for use with a variety of fire rated hinges 102mm high and up to 88mm wide.
These hinge pads are sold as singles and 2no pads are required per hinge.
Code: ITFB
Intumescent Flush Bolt Kit for use with lever action flush bolts.
Code: ITD60G1
This is an intumescent lock jacket to suit DIN standard mortice locks, made of black graphite. Select 60mm or 80mm backset.
Code: IBA730
The Applic drop down seal is available in a variety of lengths. It is surface mounted, with a maximum drop of 15mm, and is fire tested to 60 minutes.
Code: IB2117SA
These Applique Surface Drop Down Acoustic Door Seals are surface mountable and acoustically tested achieving up to 37dB Rw. They are suitable for use on FD60 (60 minute) timber fire doors.
Code: IT10PW1
This Intumescent Fire Seal - 1050mm length expands when it comes into contact with fire to fill the gap between the door perimeter and the door frame. It is an essential product to maintain a fire door rating and for the safety of a building's occupants.
Sold in packs of 25no lengths. Priced as single lengths.
Code: XB8121BL
These Corner Acoustic Perimeter Seals dramatically improves the effectiveness of a doorset assembly by reducing noise, smoke and air movement between the gap between the door perimeter and the door frame. These acoustic seals are fully compliant with Approved Document E and are super easy to fit.
Code: IT10SW1(5)
This pack contains 5no 1050mm lengths of brush fire and smoke intumescent strips to suit a single timber fire door.
Select white or brown finish, and 10mm x 4mm, or 15mm x 4mm.
Code: FC4000SS
A ZOO ZPS030 Grade 304 Stainless Steel Sprung Door Lever Latch Handle on Round Rose satin stainless steel safety lever latch handle on a sprung round rose.
Code: LPEA280-IK
This intumescent kit for the Abloy EA280 concealed door loop should be installed on timber fire doors to achieve an FD30 or FD60 fire rating.
Code: EL560-IK
The Abloy INPK-DIN-65 intumescent lock jacket is designed for use with the EL560 solenoid lock when installed on FD60 rated timber fire doors.
Code: FB4001SA
A pair of ZOO ZAA030SA Aluminium Safety Door Lever Handle on Round Rose return to door design lever handles on a screw on round rose. Satin anodised aluminium finish.
Code: FC7030SS
The ZOO VS030 Grade 304 Stainless Steel Door Lever Handle On Round Rose is a stainless steel safety lever on an unsprung round rose.
Code: KP143BK
The black push plates, made from Grade 304 stainless steel and featuring a powder-coated finish, provide durable and stylish door protection suitable for both domestic and commercial use. Available in two sizes with radius corners, these plates come with wood screws for easy installation.