Graphite Intumescent Hinge Pads - Self-Adhesive
Code: ITHG1/SA
These 1mm self adhesive graphite intumescent hinge pads are for installation with 100mm/4" fire door hinges.
2no pads are required per hinge.
Read More
Intumescent ironmongery protection kits are essential to ensure full fire rating compliance for fire doors. We have intumescent lock jackets for our mortice locks and latches and we also have sheet intumescent that can be cut down to size too.
Ironmongery can be CE marked for use on fire doors but without using correct intumescent material with them, they are non-compliant with fire door regulations (unless stipulated in test evidence). Intumescent, which is usually made using graphite, provides a barrier between the timber in a door and the ironmongery and it expands when it comes into contact with heat to fill in any gaps around it and help to slow down the spread of a fire and smoke for a period of time.
It is extremely important that you choose intumescent material with the appropriate fire rating to correspond with the fire rating of the door itself for full fire door compliance. Please ensure that you read the descriptions of each product to check for the fire rating level achievable. If you would like any assistance or want to be extra sure, give our friendly and knowledgeable sales team a call on 01305 263300 or contact us through our website.
Active filters
Code: ITHG1/SA
These 1mm self adhesive graphite intumescent hinge pads are for installation with 100mm/4" fire door hinges.
2no pads are required per hinge.
Code: ITHG1(6)
These Intumescent Hinge Pads are made from black graphite and suit 100mm/4" hinges.
Sold as either:
A pack of 6 plates to suit 3no hinges
or
Single units, where 2 intumescent hinge plates would be required to install with 1no hinge.
Code: ITUKGTL
A universal intumescent kit to suit tubular mortice latches (Latch not included).
Code: ITHM1/SA
These 1mm self adhesive Interdens intumescent hinge pads are for use with 100mm / 4" fire door hinges. 2no pads are required per hinge.
Code: ITHM1-36
These 1mm Interdens intumescent hinge pads are for use with a variety of fire rated hinges 102mm high and up to 88mm wide.
These hinge pads are sold as singles and 2no pads are required per hinge.
Code: ITFB
Intumescent Flush Bolt Kit for use with lever action flush bolts.
Code: ITD60G1
This is an intumescent lock jacket to suit DIN standard mortice locks, made of black graphite. Select 60mm or 80mm backset.
Code: ITUKGD
A universal intumescent kit to suit British Standard deadlocks. (Lockcase not included).
Code: ITSHEET
A high performance intumescent graphite sheet, ideal to for cutting to size to install with ironmongery on fire rated doors, such as hinges, lockcases, latches and concealed door closers.
Code: ESAL900-IK
An intumescent pack for use with the AL900 Fire Rated Electric Strike.
Code: ITD60M1
This is an intumescent lock jacket to suit DIN standard lockcases, made of 1mm mono ammonium phosphate. Select 60mm or 80mm backset.
Lockcases are supplied separately.
Code: ML350-IK
This 1mm intumescent lock kit is for use with the GEM ML350 electric lock when installed on FD60 rated fire doors.