

The Trimec ES8100 electric lock has a high torque mortised bolt that moves into a V shaped strike plate pulling the door into alignment with the lock. Fire rated versions are supplied with an intumescent kit to suit either FD30 or FD60 rated fire doors.
The ES8100 has superseded the Trimec ES8000 model.
Read more

Trimec ES8100 V-Lock Electric Bolt for Secure Door Control
The Trimec ES8100 V-lock is a high performance electric locking solution designed to handle demanding conditions, including side loads of up to 100kg and door misalignments of up to 12mm. Its V-shaped strike plate guides the motorised bolt into position, actively drawing the door into alignment for reliable locking. Suitable for single and double action timber or metal doors, it’s a versatile choice for a wide range of facilities.
The Assa Abloy ES8100 has been tested for fire rated doors when fitted with the appropriate intumescent kit. Use the drop down menu to select from FD30 and FD60 to include the intumescent kit with the lock.
The ES8100 replaces the earlier Assa Abloy Trimec ES8000 V-lock model, sharing the same case and face plate dimensions for direct compatibility. The updated strike plate is slightly wider by 3mm, increasing its ability to handle door misalignments.
Key Product Features:
- Supersedes the Trimec ES8000
- 12V-24V DC operating voltage
- 1000mA peak current
- 35mA idle current at 12V DC with LED activated
- Peak current 1000mA
- Side load rated unlocking with maximum 100kg at the bolt*
- Locking under preload of up to 35kg
- Suitable for misaligned doors up to 12mm (+/-6mm)
- Can handle door gap of 3-8mm
- For single and double swing doors
- Suitable for timber and metal doors
- Fail safe or fail secure operation
- NO/NC lock status monitoring
- NC door position monitoring
- Mortice mounting
- IP53 rated
- Suitable for external use
- Vertical or horizontal mounting**
- Not suitable for floor mounting
- 3 second locking time
- 1 second unlocking time under preload
- Strength: 1000kg max
- CE marked
- UKCA marked
- Operational temperature range of -10° to 60°C
- Durability tested to 500,000 operations
- Stainless steel construction
- Faceplate dimensions: 256mm length x 30mm width
- Body dimensions: 210mm length x 42mm depth x 24mm width
- FD30 and FD60 options include the lock and intumescent kit
*100kg in 3-wire mode, 15kg in 2-wire mode.
**Not suitable for mounting in the floor.
Accessories are available for glass doors or surface mounting the ES8100 lock, so contact our team to enquire.
Trimec V Lock with Real Time Monitoring
The Assa Abloy Trimec ES8100 is equipped with built in monitoring functions that deliver real time feedback on door and lock status. With NO/NC lock status outputs and a dedicated NC door position sensor, it provides real time monitoring.
This Trimec lock features LEDs for fault detection. The Frequently Asked Questions document, available in the product downloads section, explains the meaning of each LED indicator colour and outlines the steps to investigate the associated faults.
Low Power Consumption with Fast Locking Response
With just 35mA idle current at 12V DC, the ES8100 is designed for energy efficient operation without sacrificing speed or reliability. The lock activates in under three seconds and releases in 1 second, even under side load, ensuring secure access control under pressure.
For optimal performance, pair this unit with a high efficiency PSU such as the RGL access control power supply, offering up to 92% energy efficiency and magnetic stand offs for simplified board management.
Explore our complete range of access control components to complete your system.