Due to the bad weather conditions, there may be some delays to deliveries.
BEA Eagle Artek Opening Sensor
The BEA Eagle Artek Opening Sensor is a microwave universal opening sensor for all types of automatic doors.
Read moreBEA Eagle Artek Automatic Door Opener Sensor
The BEA Eagle Artek Opening Sensor is suitable for use with all types of automatic doors including pairs of swing doors, straight sliding doors, and revolving doors.
Key features:
- Supply voltage: 12V - 24V AC with 10% tolerance, 12V - 24V DC with -10% and +30% tolerance
- 50-60HZ AC supply frequency
- Under 1W power consumption
- Mounting height between 1.8m and 4m
- Transmitter frequency: 24.125 GHz
- Transmitter radiated power <20 dBm EIRP
- Transmitter power density <5 mW/cm2
- IP54 Rated
- Temperature range of -20 degrees to +55 degrees
- 5cm/s minimum detection speed
- Cable length: 2.5m
- Dimensions: 120mm x 50mm x 50mm
- Vertical tilt angle: 0 to 90 degrees
- Lateral tilt angle: -30 to +30 degrees
This one way sensor uses microwave technology to provide efficient and effective door opening and closing cycles. It has a maximum motion detection range of 4mx2m wide, 2mx2.2m narrow and 2.2m high. This unidirectional radar sensor can also be used for cross-traffic rejection applications as it filters out parallel movements near the door, reducing the number of unwanted detections.
From the BEA door motion sensors range, the Eagle One sensor can be upgraded to the Eagle Artek due to the mounting details. With a slimline and compact design, this microwave opening sensor can be used with a broad range of door operating systems.
The basic setting on the Eagle Artek can be set using the push buttons. They allow LED feedback on the three main parameter values: immunity, size, and field shape. As the detection field adjustment is made electronically, there is no need to move the antenna manually.
