Intumescent Hinge Pads for Royde and Tucker Hi-Load Hinges
Code: XB8490XX
These 1mm Interdens intumescent hinge pads are for use with the Royde and Tucker H102 and H208 hi-load hinges. 2no pads are required per hinge.
Read More
Fire door intumescent protection is extremely important to ensure full compliance with fire door regulations. Just because a product such as a mortice lockcase has been given a certain fire rating, if it is not used with appropriate fire door intumescent materials, then it may not be fully compliant and the overall fire rating of the door can be compromised. At Door Controls Direct, safety is extremely important and we would always advise our customers to ensure that the appropriate fire door ironmongery protection is used.
Our selection of fire door intumescent protection products includes cold smoke and plain intumescent seals. They come in a variety of finishes, styles and lengths and are suitable for both FD30S half hour and FD60S hour rated fire control doors. We also supply professional standard intumescent protection for lock cases, digital locks, hinges and other door closing devices, as well as intumescent vents and letterboxes.
Most intumescent products contain graphite which expands when exposed to heat to fill any gaps between the door and the product for the set time of the expected fire rating. This expansion helps to stop and control the spread of smoke and fire through the door and can help you to successfully compartmentalise your building. You must also ensure that the door to which you are intending to use fire rated products is fit for purpose. If you’d like to know more about this, our fire door safety checklist is a good place to start.
So whether you are refurbishing your door or fitting from new, make sure to check the fire rating of the doors and fit the appropriate fire door intumescent seals and protection for both door and other ironmongery hardware products. If you have any questions about these or any other products, please give our team a call on 01305 263300 or contact us for more information.
Categories
Price
Brand
Code: XB8490XX
These 1mm Interdens intumescent hinge pads are for use with the Royde and Tucker H102 and H208 hi-load hinges. 2no pads are required per hinge.
Code: IB2117SA
These Applique Surface Drop Down Acoustic Door Seals are surface mountable and acoustically tested achieving up to 37dB Rw. They are suitable for use on FD60 (60 minute) timber fire doors.
Code: XB8468XX
Easy to fit Codelocks Intumescent Fire Kit to fit with Codelocks mechanical and electronic latch lock products. When fitted they can be installed on 30 or 60 minute fire doors.
Code: XB7010WE
This Intumescent Fire Seal - 1050mm length expands when it comes into contact with fire to fill the gap between the door perimeter and the door frame. It is an essential product to maintain a fire door rating and for the safety of a building's occupants.
Sold in packs of 25no lengths. Priced as single lengths.
Code: IBA730
The Applic drop down seal is available in a variety of lengths. It is surface mounted, with a maximum drop of 15mm, and is fire tested to 60 minutes.
Code: XB8467XX
A selection of Intumescent Kits to suit various British Standard sashlocks and deadlocks. (Lockcase not included).
Code: XB8121BL
These Corner Acoustic Perimeter Seals dramatically improves the effectiveness of a doorset assembly by reducing noise, smoke and air movement between the gap between the door perimeter and the door frame. These acoustic seals are fully compliant with Approved Document E and are super easy to fit.
Code: XB8469XX
Easy to fit Perko-Powermatic Intumescent Kit for use with the Samuel Heath Powermatic door closer, the R100 Perko-Powermatic.
Code: XB8478XX
The Abloy INPK-DIN-65 intumescent lock jacket is designed for use with the EL560 solenoid lock when installed on FD60 rated timber fire doors.
Code: XB8479XX
This intumescent kit for the Abloy EA280 concealed door loop should be installed on timber fire doors to achieve an FD30 or FD60 fire rating.
Code: XB8460XX
A high performance intumescent graphite sheet, ideal to for cutting to size to install with ironmongery on fire rated doors, such as hinges, lockcases, latches and concealed door closers.