Fire Rated Stainless Steel Lever Action Flush Bolt
Code: BB7008SS
This fire rated stainless steel lever action flush bolt is available with radius or square faceplates and in a variety of sizes. Select from the drop down menus below.
Read More
A full range for all your Door Hardware and Door Furniture needs. Door Hardware encompasses all kinds of items and in this section you will find a comprehensive range of architectural ironmongery and at the best price for quality products. Door Controls Direct can supply you with all aspects of door hardware and ironmongery as well as door closers, fire exit hardware, door hinges and door lever handles. In this section, you will find various door fixings such as door stops, fire door signage, hat and coat hooks, handrail brackets and surface and flush door bolts. We also supply intumescent ironmongery protection to ensure compliance with fire ratings. If you are looking for kickplates, hinges, pull handles you will find them here. We supply products from top quality and well-established brands, so you can purchase from us with confidence.
Perhaps you are looking for ironmongery that can help you to comply with Building Regulations BS 8300 and Approved Document M? This regulation applies to all commercial buildings and cover the following (but not limited to) areas:
1) Access routes to and around buildings
2) Entering a building
3) Horizontal Circulation
4) Surfaces & Communication Aids
5) Individual Rooms
6) Vertical Circulation
Need Door Hardware for a commercial or public building? We supply Door Hardware solutions for office buildings. For public environments such as schools, hospitals, and other public sector buildings, it is increasingly important to include both fire-exit hardware and finger protection and Door Controls Direct can guide you and supply you. We also have a selection of products that can assist with door safety and door security. So, whether it is something decorative, practical, or essential, be sure to compare our prices - you will find us incredibly favourable. We have just the thing to help you complete your projects and refurbishments.
Active filters
Code: BB7008SS
This fire rated stainless steel lever action flush bolt is available with radius or square faceplates and in a variety of sizes. Select from the drop down menus below.
Code: DC1002SS
A Stainless Steel Floor Mounted Oval Shielded Door Stop - unobtrusive and practical to protect doors and walls.
Code: HB1066SC
The Carlisle Brass FTD800D Cabinet Hinge is a non-washered cabinet hinge. Choose from one of three finishes. Hinges are sold as singles, not pairs, complete with fixings.
Code: IB3719WE
The Little Fingers heavy duty hinge jamb finger guard is available to suit either the front or rear side of hinged and pivot doors, whether left hand or right hand opening.
Code: TH2171SA
A satin anodised aluminium Hat & Coat hook in a flat strip design.
Code: DC1664CP
A cylinder pattern Projection Door Stop, available in a polished chrome, polished brass or satin chrome finish, with a black buffer. Choose from 64mm or 80mm depending on the projection of the door handle being used.
Code: DC4804SS
A range of silent pattern cabin hooks from Steelworx manufactured from Grade 316 stainless steel.
Code: TH1315SS
The ZOO ZAS75 Stainless Steel Single Coat Hook is a round bar design, concealed fixing, single coat hook on a round rose.
Code: BB6201-F12
The Axim FB-6201-F12 is a flat faced, lever action, maximum security flush door bolt in a silver finish. The fully threaded rod can be cut to length as required.
Code: DC1191SS
The ZOO ZAS91 Stainless Steel Heavy Duty Anchored Door Stop is a large, heavy duty, floor mounted, stainless steel doorstop with ground anchor.
Code: IB3721WE
The Lorient LAS9070 si Hinge Cavity Side Finger Guard and LAS9050 si Hinge Knuckle Side Finger Guard are for installation to the front, rear or both (kit), regardless of whether the door is left or right hand opening, for door safety.
Code: BB9513SS
A Satin Stainless Steel Dust Excluding Floor Socket - for concrete.
Code: DC1184SS
The ZOO ZAS84 Stainless Steel Heavy Duty Floor Mounted Door Stop is a large, heavy duty, commercial floor mounted doorstop with a black rubber buffer.
Code: IB3710WE
The Little Fingers Slimline finger guard is available as a separate front finger guard and rear guard, but also as a combined kit to fit over both door gaps.
Code: TH2175SA
A satin anodised aluminium wardrobe hook in a flat strip design.
Code: BB9313SC
Easy Clean Floor Socket for use with flush bolts, available in a choice of finishes.
Code: CB1016NP
This Fingertip Carlisle Brass FTD840 Magnetic Door Catch is a superior magnetic catch and is available in either electro-brass or nickel plate finish and is suitable for use on lightweight internal doors, wardrobes and cupboards.
Code: DC1012SS
A Satin or Polished Stainless Steel Floor Mounted Door Stop with a 30mm diameter round flat top – 40mm in height.
Code: BB2303SC
ZOO FB55, FB56, FB57 & FB58 Architectural Barrel Bolts - A range of architectural barrel bolts from ZOO Hardware. Select from four sizes and three finishes.
Code: DC1187SS
The ZOO ZAS87 Stainless Steel Sloped Floor Mounted Door Stop is a tapered design, 47mm diameter, floor mounted door stop with a black rubber buffer.
Code: DC1188SS
The ZOO ZAS88 Stainless Steel Round Collared Floor Mounted Door Stop is a domed top design, floor mounted doorstop with a black rubber collar surround.
Code: BB3008SE
The Royde & Tucker B151 Heavy Duty Barza Security Bolt is a robust, high security door bolt which is suitable for use on FD30 fire rated doors.
Code: IB3822SA
The Raven RP62 Finger Guard is for installation to the front, hinge cavity side of a hinged door, whether left or right hand opening.